VTube-LASER v2.9.19

From ATTWiki
Revision as of 19:21, 4 April 2019 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-laser logo 1.96.png


Revision 2.9.19

Release Date: April 3, 2019
Current Build: 4


Vtube-laser v2.7 screenshot.png


Check.jpgNEW - Compatible with Baces USB Arm

VTube-LASER can now connect to and control a Baces USB arm.

Vtubelaser bacesarm.png

Check.jpgNEW - VTube-STEP Mode Alpine M4 and CSM M4 export filenames can use more than 20 characters.

VTube-LASER would not allow VTube-STEP to export an MBF filename with more than 20 characters. Alpine and CSM have changed this limitation for the characters in the filename, so we have changed it in VTube-STEP as well.

Alpinelogo.pngAlpinebender.png
Csm logo.png CSM 30TBRE Bender.png


Check.jpgFIX- Important Corrections Loop Fix for the COMCO Protocol.

VTube-LASER would only make the first correction properly using the COMCO protocol. Second corrections were incorrect because of the way VTube handled the correction data column of the COMCO data. This has been fixed in this version.

Vts v2.9.18 BenderSetup COMCOCSV.png



Check.jpgNEW - Renamed for clarity: The configuration setup list in the Measure 1 menu in System Options is now called "Tolerance Configuration Profile List"

The setup list for configuration for Measure 1 inside System Options had an ambiguous name that led to confusion. We renamed it to make its purpose more clear.

Vts v2.9.19 SystemOptionMeasure1ToleranceConfigurationProfileList.png

Other Pages