Difference between revisions of "VTube-LASER v2.9"

From ATTWiki
Jump to: navigation, search
(25px NEW: END POINT DIMENSION)
(25px ENHANCED: END SCAN ANALYSIS MUCH IMPROVED)
Line 57: Line 57:
 
</table>
 
</table>
  
==[[image:Check.jpg|25px]] ENHANCED: END SCAN ANALYSIS MUCH IMPROVED==
+
==[[image:Check.jpg|25px]] ENHANCED: END SCAN PLACEMENT IS MUCH IMPROVED==
  
 
<table cellpadding=10 width=1100>
 
<table cellpadding=10 width=1100>

Revision as of 20:42, 27 October 2017

Vtube-laser logo 1.96.png


Revision 2.9

Original Release Date: November 1, 2017
Latest Build: 75


Vtube-laser v2.7 screenshot.png

Contents


Check.jpg NEW - ASSEMBLY

VTube now allows you to include multiple tubes in a single project.

  • Add new tubes to existing tubes.
  • Measure all the tubes together.
  • Align all the tubes together.



Check.jpg ENHANCED - Bender Number Saved and Recalled with Project File

VTube now saves the Bender Setup bender number to the project file.


Check.jpg ENHANCED: END SCAN PLACEMENT IS MUCH IMPROVED

The end scan algorithm in version 2.9 much faster than previous versions and is it also much better at finding the correct furthest point in the scan. This makes end scans much easier.

Check.jpg NEW: END POINT DIMENSION

VTube now automatically draws a linear dimension in the viewport between the scanned point and the final offset point to confirm that the distance is correct.

Vtube-laser v2.9 lineardimension endoffset.png

Check.jpg NEW: SEARCH AND MOVE IN PATH MANAGER

VTube now lets you search for path names in the Path Manager.

It also allows you to move the paths up or down in the lost.

Vtube-step 2.8.4 pathmanager search.png



Check.jpg BUILD 1 - REMOVED "Move Arm from Cradle" MESSAGE

This message appeared when loading VTube-LASER projects on older arms. This message is no longer displayed because it is not needed with then newer FARO drivers.


Check.jpg BUILD 1 - CTRL-S SAVES THE PROJECT THEN BRINGS LASER WINDOW TO THE FRONT

This fixes an issue where the Ctrl-S would bring the STEP mode window to the foreground when saving VTube-LASER projects. Now the VTube-LASER window moves back to the top after the save.

Other Pages