VTube-LASER v2.8.5

From ATTWiki
Revision as of 20:00, 26 July 2017 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-laser logo 1.96.png


Revision 2.8.5

Original Release Date: July 25, 2017
Latest Build: 1


Vtube-laser v2.7 screenshot.png

Contents


Check.jpg BUILD 1 - NEW: IMPORT MASTER DATA FROM VTP FILES

You can now import the MASTER tube data from VTP - VTube Project files.

This allows for the import of older VTube-LASER project files without changing the measuring center setup for newer versions of VTube-LASER.

Vtube-laser v2.8.5 importVTPmaster.png

Check.jpg BUILD 2 - IMPROVED: REVERSE CALC

In previous versions, when performing REVERSE CALC from bender data to centerline XYZ data, VTube-LASER could not keep the previous part orientation in 3D space when the first leg ran parallel to the Z axis.

The part data on the right shows the first leg moving positive only in the Z axis. This is an example of data that could not be handled during reverse calculation.

The math engine has been improved to handle this condition.

Vtube-laser 2.9.4 reverse calc.png

Check.jpg BUILD 2 - NEW: DATUM REPORT TEMPLATES - MEASURED Distances to MASTER DATUM

Previous versions of VTube could only display DATUM reports with MEASURED-ALIGNED to MEASURED-ALIGNED DATUM or MASTER to MASTER DATUM values.

Now VTube-LASER can show DATUM reports with MEASURED-ALIGNED distances to MASTER Datums.



To use these new report templates:

  1. Download these two new templates: Zip file of Measured to Master Datum Report Templates.
  2. Extract them to a folder location that you can find.
  3. Load VTube-LASER.
  4. Go to Reports.
  5. Click on the Templates tab.
  6. Click on Import.
  7. Find and click on the new Datum templates.
  8. Repeat at step 5 for the second template file.

Vtube-laser 2.8.4 datum report.png

Check.jpg BUILD 2 - IMPROVED: REPORT WINDOW TO FRONT

We've improved the REPORT window's ability to come to the top of the current window.

Vtube-laser v2.8.4 report on top.png


Check.jpg BUILD 3 - NEW: GERMAN TRANSLATION UPDATED

The German translation for VTube-LASER is updated and included in the installation.

The translation is in the file german_v2.8.4_build3.xls.


Check.jpg BUILD 3 - NEW: JAPANESE TRANSLATION UPDATED

The Japanese translation for VTube-LASER is updated and included in the installation.

The translation is in the file japanese_v2.8.4_build3.xls.


Check.jpg BUILD 3 - NEW: FRENCH TRANSLATION UPDATED

The French translation for VTube-LASER is updated and included in the installation.

The translation is in the file french_v2.8.4_build3.xls.

Check.jpg BUILD 3 - FIX: USER INTERFACE ENGLISH GRAMMAR CORRECTIONS

Our German translator helped us correct several problems with the English in the VTube user interface.

Other Pages