VTube-LASER v2.1.2

From ATTWiki
Revision as of 19:30, 14 June 2015 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-laser logo.jpg

Revision 2.1.2

Vtube-laser 1.89 mainscreen.png



Check.jpg ENHANCED: Improved Graphics

  • Perspective projection is much improved.

  • Point labels drawing has improved logic and is much faster.

Vtube-laser 2.1.2 hvac with points.png

Check.jpg NEW: STEP Export is Faster for Large Models

The export speed on large models is now several times faster than in previous versions.

If you export STEP files, then this is an important update for you.

Vtube-step-2.1.2 stepexport.png

Check.jpg ENHANCED: Path Manager

The Path Manager is displayed whenever a file load or save operation is about to happen. It allows you to persistently save important paths to a list of paths for easy access in the future.

  • The Path Manager now shows the operation for which it as asking you to choose a path.

  • The Path Manager is now used for all Import and Export features.

  • New Path Manager buttons have been added for new features, and re-arranged for easier use.

VTube PathManager ActionContext.png
Vtube-step-2.1 PathManager Closeup.png

Check.jpg ENHANCED: Automatically Export STEP to SOLIDWORKS

Vtube-step-2.1 STEP Export SolidWorks Import.png

Now automatically send an exported STEP file to SolidWorks.

Vtube-step-2.1 STEP Export SolidWorks Import SolidWorksScreen.png

Check.jpg Other Changes

  • The VTube configuration file location was changed to the more standard "c:\ProgramData\VTube" location.

  • The installation performs a better job of setting up the configuration file location.

  • The Supravision network engine has been enhanced to handle data files that don't follow the Supravison spec perfectly.

  • We fixed a ball probe measurement issue where VTube would sometimes not always take in single points from the FARO driver. This issue created problems with measuring cut planes too. If you measured cut planes, and still couldn't get the cut plane to work properly, then it was probably due to this issue.


Other