VTube-LASER v1.94

From ATTWiki
Revision as of 15:22, 2 September 2014 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-laser logo.jpg

Revision 1.94


Vtube-laser 1.89 mainscreen.png





Check.jpg NEW: Tube Data Storage Toolbar Button

Vtube-laser 1.94 tubedatastorage toolbar button.png

VTube now has a Tube Data Storage feature that allows you to store the tube data for every measure.

Check.jpg NEW: Tube Data Storage Menu

The new Tube Data Storage menu allows you to view historical time-stamped part measures - and view combined inspection data grids for export to Word or Excel.

Screen Controls 1

Vtube-laser-1.94 tubedatastorage datacontrols1.png

Screen Controls 2

Vtube-laser-1.94 tubedatastorage datacontrols2.png

Foundational Features

  • It automatically saves the date-time stamped tube data at alignment after a measure.
  • It allows you to copy the current tube data into storage at any time.

  • Values stored are:
    • General Part Setup Data
    • MASTER tube data
    • MEASURED tube data
    • MEASURED Aligned tube data


Expanded Grids=

The expanded grids can hold multiple parts (whichever part is selected with checks in the Tube Data Storage).

Vtube-laser-1.94 tubedatastorage expanded tangents.png

Check.jpg NEW: Added to the Popup Menu to Synchronize End Diameters with Main Diameter

The pop up menus for the Part Setup menu (STEP and LASER modes) now allow for the end diameters to be synchronized with the main diameter.

Vtube-1.93 SyncEndDiametersPopup.png

Vtube-1.93 EndDiametersAfter.png

Check.jpg NEW: Previous Paths List in Quick Open

The Quick Open dialog now has a pull-down list that shows all the recent previous paths used to load VTube project files or imported solid model files.

Click on the previous path to use, and the folder tree on the left will open the new folder.

Vtube-1.93 PreviousPaths.png

Check.jpg Other Changes

  • Updated the Chinese translation.

  • Updated the German translation.

  • When VTube performs an alignment, it will now automatically switch to the Tangent point deviation menu to show updates in real-time.


Other