Difference between revisions of "VTube-LASER v1.94"

From ATTWiki
Jump to: navigation, search
(→‎Foundational Features)
Line 25: Line 25:
 
The major change in this version is the addition of the Tube Data Storage feature - which can permanently store the current tube data at any time.
 
The major change in this version is the addition of the Tube Data Storage feature - which can permanently store the current tube data at any time.
  
 +
<table cellpadding=10>
 +
<tr valign=top>
 +
<td width=600>
 
====Foundational Features====
 
====Foundational Features====
 
* VTube automatically saves the date-time stamped tube data at alignment after a measure.
 
* VTube automatically saves the date-time stamped tube data at alignment after a measure.
Line 35: Line 38:
 
* We've tested VTube with hundreds of stored tubes.  The Tube Data Storage menu reports the number of parts in memory, and the amount of memory the parts consume.
 
* We've tested VTube with hundreds of stored tubes.  The Tube Data Storage menu reports the number of parts in memory, and the amount of memory the parts consume.
 
* The individual tube data sets stored can be deleted to free additional room.
 
* The individual tube data sets stored can be deleted to free additional room.
 +
</td>
 +
<td width=500>
 +
</td>
 +
</tr>
 +
</table>
 +
 +
<br><br>
  
 
===[[image:Check.jpg|25px]] NEW: Tube Data Storage in the Toolbar===
 
===[[image:Check.jpg|25px]] NEW: Tube Data Storage in the Toolbar===

Revision as of 16:04, 2 September 2014

Vtube-laser logo.jpg

Revision 1.94

Vtube-laser 1.89 mainscreen.png





The major change in this version is the addition of the Tube Data Storage feature - which can permanently store the current tube data at any time.

Foundational Features

  • VTube automatically saves the date-time stamped tube data at alignment after a measure.
  • VTube allows you to copy the current tube data into storage at any time.

  • Values stored are:
    • General Part Setup Data
    • MASTER tube data
    • MEASURED tube data
    • MEASURED Aligned tube data
  • We've tested VTube with hundreds of stored tubes. The Tube Data Storage menu reports the number of parts in memory, and the amount of memory the parts consume.
  • The individual tube data sets stored can be deleted to free additional room.



Check.jpg NEW: Tube Data Storage in the Toolbar

Vtube-laser 1.94 tubedatastorage toolbar button.png

VTube now has a Tube Data Storage feature that allows you to store the tube data for every measure.

Check.jpg NEW: Tube Data Storage Menu

The new Tube Data Storage menu allows you to view historical time-stamped part measures - and view combined inspection data grids for export to Word or Excel.

Screen Controls 1

Vtube-laser-1.94 tubedatastorage datacontrols1.png

Screen Controls 2

Vtube-laser-1.94 tubedatastorage datacontrols2.png

Expanded Grids with Multiple Parts

The expanded grids can hold multiple parts (whichever part is selected with checks in the Tube Data Storage).

Vtube-laser-1.94 tubedatastorage expanded tangents.png



Export the Part List

Export the entire part list to Word or Excel.

Vtube-laser-1.94 tubedatastorage export partlist.png


Copy Any Part Set Back Into VTube

Copy any single part set back into VTube.

Vtube-laser-1.94 tubedatastorage copytube into vtube.png

Check.jpg Other Changes

  • When VTube performs an alignment, it will now automatically switch to the Tangent point deviation menu to show updates in real-time.

  • The Intersection Deviations now update in real-time during a best fit. Switch to this menu any time during the alignment to see the numbers change.

  • A new "array_xyz_int_dev" parameter for report templates allows for 3D deviations to display in reports.

  • VTube now stores up to 10 undo states.

  • Expanded grids no longer remove the previous Windows clipboard data when transferring.
  • All the Tube Data Storage memory was added to the VTube project file structure so that it always stores the data to the VTP files.


Other

Retrieved from "http://www.advancedtubular.wiki/index.php?title=VTube-LASER_v1.94&oldid=25408"