VTube-LASER v1.93

From ATTWiki
Revision as of 18:02, 23 July 2014 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-laser logo.jpg

Revision 1.93


Vtube-laser 1.89 mainscreen.png





Check.jpg NEW: Import CSM M3 Bender Files (VTube-STEP Mode)

Vtube-step-1.93 csm m3 import button.png

(The VTube-STEP mode is included with VTube-LASER.) VTube-STEP can now import CSM M3 bender files.

  • Import the centerline XYZ data.
  • Or import the YBC data.

Vtube-step-1.93 csm m3 import radiobuttons.png

  • Other values imported are:
    • Diameter
    • Wall Thickness
    • Pre Length (Start Length)
    • End Length
    • Cut Length
    • Pipe Material Note

Vtube-step-1.93 csm m3 importfeature.png


Check.jpg NEW: Added the Default Tolerance Value in Part Setup

Some output formats prefer to have a default tolerance built into the export, so now the Default Tolerance value is included in the VTube-STEP Part Setup menu.

Vtube-1.93 DefaultTolerance PartSetup.png

Check.jpg Other Changes

  • Also in VTube-STEP: The SMI export dialog now properly saves the last SMI export path.

Other