VTube-LASER v1.82

From ATTWiki
Revision as of 16:22, 22 June 2013 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-laser logo.jpg

Revision 1.82

Vtube-laser 1.81.4.jpg





Check.jpg NEW: Updated Interface

The new interface uses a blue gradient for a better viewing experience.

Vtube-1.82 screen.jpg




Check.jpg NEW: Measure Rectangular Tube

VTube now measures rectangular and square tube shapes with the laser or ball probes.

Vtube-laser-1.82 rectangulartubes scanneddata.jpg

  • FILLET EDGE DETECTION:The laser scanning feature includes edge detection in order to remove the fillet from the plane calculations. In this image, see how VTube detects edge fillets and removes them automatically from the calculation of the planes.

  • TRUE CENTERLINE LOCATION: The process and logic automatically calculates the location of the centerline from the true surface data. The nominal width data is not needed to find the centerline.



Vtube-laser-1.82 rectangulartubes aligned.jpg

Vtube-laser-1.82 rectangular scanneddata closeup.jpg



Check.jpg NEW: Automatic Build to SolidWorks

VTube can now automatically build a parametric 3DSketch tube in SolidWorks. VTube uses automation features to become the user and draw the part in SolidWorks 3DSketch, then sweep the diameter and shell the part is a wall thickness value is greater than zero.

If SolidWorks is not loaded, then VTube will attempt to load SolidWorks first. If SolidWorks is already open, then VTube will create a new part in a new window automatically.

Vtube-step-v1.82-VT2SolidWorks.jpg


Vtube-step-v1.82-VT2SolidWorks tubesonly.jpg




Check.jpg NEW: Intersection Point Inspection Grid

VTube has a new XYZ intersection point inspection grid in the Inspection menu.

Vtube-1.82 xyzintersection inspection grid.jpg.jpg


Vtube-1.82 xyzintersection inspection grid entire screen.jpg



Check.jpg Other Changes

  • The viewport background has been enhanced with a gradient color.

  • Overbend Calculator is now integrated into VTube. The values are now always updated and transferred back to VTube as they are entered in the Overbend.

  • Fixed default radius bug for single straight tubes.

  • Repaired the End Label delete when tube is cleared. (The End Labels did not always clear from the screen when the tubes were cleared or turned off.)

Other