Difference between revisions of "VTube-LASER v1.81"

From ATTWiki
Jump to: navigation, search
(New Separate Report Template Setup for STEP and LASER)
(New Winton ECNC 4 Bender Correction)
Line 27: Line 27:
  
 
===New Winton ECNC 4 Bender Correction===
 
===New Winton ECNC 4 Bender Correction===
 +
[[image:winton_ecnc_4_screen.jpg|400px]]<br>
 
*This version can read and write ECNC offline program files.  
 
*This version can read and write ECNC offline program files.  
 
*Every value that can be setup in ECNC can also be setup in VTube-LASER.
 
*Every value that can be setup in ECNC can also be setup in VTube-LASER.

Revision as of 02:41, 11 January 2013

Vtube-laser logo.jpg

Revision 1.81

Vtube-laser 1.78.jpg




New Separate Report Template Setup for STEP and LASER

  • Previous versions had identical setups in both modes.
  • Some report templates are only appropriate in LASER because LASER handles inspections.
  • Now the setup of each is stored separately.


New Winton ECNC 4 Bender Correction

Winton ecnc 4 screen.jpg

  • This version can read and write ECNC offline program files.
  • Every value that can be setup in ECNC can also be setup in VTube-LASER.


New Supravision Project Wall Thickness Import/Output

  • Previous versions did not save the wall thickness
  • This version imports and exports the wall thickness value.


New Supravision Project Qualification Tolerance Envelopes Import/Export

  • This version now imports and exports these values:
    • Default Qualification Envelope Tolerance
    • A End Length Qualification Tolerance
    • B End Length Qualification Tolerance
    • A End Angle Qualification Tolerance
    • B End Angle Qualification Tolerance


New Inspection Grid Row Count Control

  • VTube now controls the grid row count with the MASTER data row count rather than the MEASURED data row count.
  • This allows the grid to be populated even if the Measured data is cleared.


Other Pages