VTube-LASER v1.80

From ATTWiki
Revision as of 23:33, 20 November 2012 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-laser logo.jpg

Revision 1.80

Vtube-laser 1.78.jpg




New Transform MASTER Centerline Data so Any Bend is True in the XY Plane

  • Transform the centerline orientation so that any bend is true.
  • The 0,0,0 datum is always placed at the center of the true bend radius.
  • This feature can be combined with the Excel output in order to automate the building of compound tools in solid model programs.


Vtube transform truebend one.jpg

Before transformation:
Vtube hvac transform none.jpg

After transformation with bend 1 true to the XY plane:
Vtube hvac transform one.jpg


End Trim Length Fix

  • For single bends in the inspection grid, the end trim lengths were 1/2 the correct value. VTube-LASER was incorrectly considering single bends as single straight parts. This is corrected.

Vtube-laser singlebend inspectionscreen.jpg

Updated Hardware Key Driver

  • The latest version of the SafeNet hardware key driver is included in this installation.

Safenet hardwarekey installation.jpg

Other Pages