Difference between revisions of "VTube-LASER v1.80"

From ATTWiki
Jump to: navigation, search
(Transform Tab in MASTER Data)
(Transform Tab in MASTER Data)
Line 30: Line 30:
 
After transformation with bend 1 true to the XY plane:<br>
 
After transformation with bend 1 true to the XY plane:<br>
 
[[image:vtube_hvac_transform_one.jpg|300px]]<br>
 
[[image:vtube_hvac_transform_one.jpg|300px]]<br>
 +
<br><br>
  
 
===End Trim Fix===
 
===End Trim Fix===

Revision as of 05:10, 17 November 2012

Vtube-laser logo.jpg

Revision 1.80

Vtube-laser 1.78.jpg


Transform Tab in MASTER Data

  • Transform the centerline orientation so that any bend is true.
  • The 0,0,0 datum is always placed at the center of the true bend radius.


Vtube transform truebend one.jpg

Before transformation:
Vtube hvac transform none.jpg

After transformation with bend 1 true to the XY plane:
Vtube hvac transform one.jpg


End Trim Fix

  • In the inspection grid, the end trim lengths were 1/2 the correct value in one bend parts.
  • This is repaired.



Other Pages