VTube-LASER v1.79

From ATTWiki
Revision as of 05:33, 10 November 2012 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-laser logo.jpg

Revision 1.79

Vtube-laser 1.78.jpg



Add CAM2 Measure 10 output for both MASTER and MEASURED XYZ data

  • Save CAM2 Measure 10 tube data for import into CAM2.
  • Save the MASTER or the MEASURED.
  • Save using a Popup menu in the XYZ grid, or save from the the File tab.

Added Split Bend collection feature in Collect Control in STEP mode

  • Split bend (for handling 180 degree bends or greater) was available in LASER mode - now it is available in STEP mode too.
  • This means that you can also display compress LRA data with two 90s being combined to show a 180 (for example).

New Collection Type Split Bend in STEP Mode

  • In STEP mode, you can select an arc section that* becomes the guide for the intrados and extrados - showing VTube where to form the split bend centerline.
  • The split construction model now displays in STEP mode.

Vtube-step splitbend constructionmodel.jpg

Split Bend algorithim for extracting the tube centerline in LASER mode is improved

  • The formula for building the centerline in the split bend area is improved and more reliable.

Added new Radius Table in XYZ pop-up grid for storage of often-used radii

  • Store commonly used radii in a table for use in the future.
  • Any number can be added to the list.
  • VTube can now output TRUE radius as well as NOMINAL radius values based on the radius table.

Vtube radius table popup.jpg Vtube radius table.jpg

VTube can now output TRUE radius as well as NOMINAL radius values based on the radius table

Fixed slow dragging control windows in STEP mode The End Scan Diameter

Qualification Tolerance value is now in the Measure Setup menu of LASER mode

The Maximum Number of Points Allowed in Cyllinder Laser Stripe value is moved to the Measure Setup menu of LASER mode

The Spin Edit controls in the Measure Setup can now be manually set with the keyboard.

Faster loading and unloading of VTube-LASER persistence files

New options in XYZ pop-up menus.

Check.jpg NEW: Bender Data Output with Full Springback

1 - Bender Communiciation with Full Springback

Full springback is now included in direct communications with benders connected to the bender network in VTube. This data responds to the Fixed and Proportional springback values in the Part Setup menu.

The benefit of this feature is that you can include springback in the original master data for first-time setup of the bender.

Note: This feature is accessed from VTube-STEP mode which is included in the VTube-LASER license.

Vtube-laser springbackoutput communication v1.78.jpg

2 - Reports can Output LRA with Full Springback

Full springback can now be printed in the reports for first-time setup of benders. This report responds to the Fixed and Proportional springback values in the Part Setup menu.

This feature also includes the added report tags that allow for the values with springback to be placed anywhere in the report:

  • Array_L_FullSpringback
  • Array_A_FullSpringback

And they are used in a report template like this:

<vtube_val>Array_L_FullSpringback</vtube_val>

Vtube-laser springbackreport v1.78.jpg

3 - Bender Files Output LRA with Full Springback

Full springback is now included in the export of bender files in all formats. This data responds to the Fixed and Proportional springback values in the Part Setup menu.

Note: This feature is accessed from VTube-STEP mode which is included in the VTube-LASER license.

Vtube-laser springbackoutput v1.78.jpg

Check.jpg NEW: "Supplier" Field in Part Setup

Some of our customers receive parts from suppliers, so we've added a "Supplier" field in the Part Setup menu.

This data is saved in the project files.


This feature also includes the added report tags that allow for the values with springback to be placed anywhere in the report:

  • "Supplier"


And it is used in a report template like this:

<vtube_val>Supplier</vtube_val>

Vtube-laser supplierfield v1.78.jpg

Check.jpg NEW: IMPORT Template Feature in Report Menu

The report menu was reorganized and an IMPORT feature was added to simplify the import of REPORT TEMPLATES into your VTube system. Choose the html report to import, and VTube automatically copies it into the system and adds it to the template list.

For customers with active Software Maintenance Plans, you can show us the style of report you want. If possible, we will help you build the report template.

Vtube-laser importreporttemplate v1.78.jpg

Check.jpg ENHANCED: New Master XYZ Pop-Up Menu Commands

New features in the XYZ pop-up menu adds new commands.

  • Reset to Zero Around First Row
  • Reset to Zero Around Selected Row
  • Additive invert the entire selected column (for mirror imaging)

Vtube-laser mirror image additive inverse.jpg

Vtube-laser popup v1.78.jpg

Check.jpg ENHANCED: New Measured XYZ Pop-Up Menu Commands

New features in the XYZ pop-up menu adds new commands.

  • Reset to Zero Around First Row
  • Reset to Zero Around Selected Row


Vtube-laser popup measured v1.78.jpg

Other Pages