VTube-LASER v1.68

From ATTWiki
Revision as of 03:01, 9 August 2011 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-laser logo.jpg

Revision 1.68

Back to VTube-LASER
Back to VTube-STEP

Vtube-laser screen 1 68.jpg

Contents


Check.jpg NEW: Excel Report Builder

Vtube-laser excel.jpg

VTube-LASER can now build a Excel report quickly. This is useful for taking your reports even further for Gage R&R an custom reports.

Check.jpg REVISED: Overbend Calculator

Vtube-laser overbend.jpg

The Overbend Calculator was redesigned and improved.

When Cut Plane is active a Cut Plane icon displays at the bottom of the Navigation pane. (See the orange arrow above.)

Check.jpg NEW: More Option in the Bender Setup

Vtube-laser bendersetup saveSV.jpg

Bender Setup can now save Supravision files from the bender setup data to the network. The menu can send either bender data with corrections or bender data without corrections. For uni-directional benders, you can merge Adjustments back into the bender data after sending data to the bender.

Check.jpg NEW: Added Tab Menus in the MASTER XYZ Menu

New tab menus with new options are now placed in separate tab menus in the Master XYZ menu.

Vtube-laser master xyz tabmenus setpoints.jpg
Vtube-laser master xyz tabmenus.jpg
Vtube-laser master xyz tabmenus splitbend.jpg



Check.jpg NEW - Add After Row in MASTER XYZ

  • Now add rows after the current row in Master XYZ data. This allows users to add a row after the last row of XYZ coordinates.

Vtube-laser addafterthisrow.jpg

Check.jpg Other Changes

  • The Save Project Before Continuing window now has a third button added that allows you to Cancel the operation that would lose the current project changes. This allows operations like project file load or program close to be stopped.

Vtube-laser saveproject beforecontinue.jpg

  • The Data Handling menu has been updated to include the Split Bend feature.

Vtube-laser datahandlingpane 1 67.jpg

  • The MASTER XYZ grid popup menu now includes the Add after this XYZ Row feature to allow operators to add XYZ rows after the last row.

Vtube-laser AddAfterThisXYZRow 1 67.jpg

  • Cross-check lengths now show negative when the cross-check is short.

Vtube-laser CrosscheckNegative 1 67.jpg

  • Reverse calculation now retains the MASTER part orientation if possible. This allows you to change the LRA data, press Calculate XYZ, and retain the original orientation of the master part. (Note: v1.67b)

  • The example on the right shows an increased third straight length from 2 to 4 inches with the part retaining the original orientation.

Vtube-laser ReverseCalc OriginalOrientation.jpg



Check.jpg Issues with this version fixed in newer versions

  • No known issues



Other Pages

VTube-LASER Training Video - How to perform effective end scans.

Vtube-laser effective end scan video b.jpg