Revision 1.68

Back to VTube-LASER
Back to VTube-STEP

VTube-LASER can now build a Excel report quickly. This is useful for taking your reports even further for Gage R&R an custom reports.

The Overbend Calculator was redesigned and improved.

When Cut Plane is active a Cut Plane icon displays at the bottom of the Navigation pane. (See the orange arrow above.)

Bender Setup can now save Supravision files from the bender setup data to the network. The menu can send either bender data with corrections or bender data without corrections. For uni-directional benders, you can merge Adjustments back into the bender data after sending data to the bender.

New tab menus with new options are now placed in separate tab menus in the Master XYZ menu.

• Now add rows after the current row in Master XYZ data. This allows users to add a row after the last row of XYZ coordinates.

• The radius values now correctly copy back to XYZ radius values when performing a reverse calc.

• The Data Handling menu has been updated to include the Split Bend feature.

• The MASTER XYZ grid popup menu now includes the Add after this XYZ Row feature to allow operators to add XYZ rows after the last row.

• Cross-check lengths now show negative when the cross-check is short.

• Reverse calculation now retains the MASTER part orientation if possible. This allows you to change the LRA data, press Calculate XYZ, and retain the original orientation of the master part. (Note: v1.67b)
  
  
• The example on the right shows an increased third straight length from 2 to 4 inches with the part retaining the original orientation.

• No known issues

VTube-LASER Training Video - How to perform effective end scans.