VTube-LASER v1.61

Revision 1.61 Back to VTube-LASER

NEW: Floating End Letters

Floating end letters can be switched on to help identify the ends A and B of the tube. Control the state of the labels in the View Control pane on the right side of the screen.

NEW: Can Automatically Expanded or Reduced End A and End B Diameter

If either End A or End B are set to a value of ZERO, then they will be automatically calculated based on the straight measurement adjacent to the end of the tube. The Part Setup on the right is from a measurement of B end tube straight where a 1.130" expansion was measured. End B was set to zero, and VTube automatically filled in the expanded end diameter.

NEW: Automatically Set a ZERO Default Radius to 1.5 Times the Diameter

If VTube discovers a default radius value of ZERO, then it will automatically reset the default radius to 1.5 times the nominal diameter before converting to the measured menu.

Other Changes

Better math handling when the radius is set to zero. Much more efficient redraws in the view port Small user interface fixes and refinements The maximum number of LLP strings per measure allowed is increased in the Measure 2 tab of the Systems Options menu. The Measure a Tube control is changed to allow you to qualify the image on the screen before exiting the measure process. This adds a step to the measure process. Include End A Diameter and End B Diameter variables in Supravision file import and export. New help file and manual with updates and additional sections like "How to Scan a Straight."

Issues with this version fixed in next version

No known issues

Other Pages

• Back to VTube-LASER