VTube-LASER v1.54

Revision 1.54 Back to VTube-LASER

NEW - DRO: Digital Readout

The digital readout was added to give feedback for the arm motion - especially for arm diagnostics.

ENHANCED - Arm as Mouse Feature

The automatic "arm as a mouse" feature is enhanced so that the arm can be used as a mouse whenever a dialog displays on the screen - even in the middle of tube measurement. As soon as the dialog closes and measuring resumes, the arm as a mouse feature switches off. The Arm Mouse state button is used to change the state of the arm as mouse.

ENHANCED - Automatic Clear Measure Process After End B Measure

Now the Measure Tube process automatically clears from the screen after the data from End B is collected This causes the tube measure control to close automatically.

NEW - Realtime Calculation of Intersection

Intersection points are calculated in realtime and displayed on the screen as orange points.

NEW - Realtime Calculation of Intersection Error

Each point is checked for a Maximum Intersection Error which is set in the Measuring 2 tab of the System Options menu. The default tolerance is 2mm, or 0.078 inches. If an intersection error calculates beyond the tolerance, then VTube stops and warns the operator of a potential problem, then allows him to remeasure or continue to the next straight.

NEW - Codesigning of VTube.exe

The VTube program is now code signed in order to comply with the Microsoft Authenticode requirements. Ensures authenticity - users that they know where the code came from Ensures integrity - verifies that code has not been tampered with since publication Reduces error messages and security warnings on download and installation on Windows Vista and Windows 7 computers

NEW - Verified Bluetooth Compatible

VTube-LASER is verified to work with the FARO ScanArm Bluetooth connection.

Other Pages

• Back to VTube-LASER