VTube-LASER Videos for MicroScribe

From ATTWiki
Revision as of 18:27, 21 April 2022 by Mcone (Talk | contribs)

Jump to: navigation, search

See a list of VTube-LASER videos for MicroScribe arms from Revware on this page.

VTL Videos MicroScribe.png




Version 3.2

Video 20220421: How To Set Up and Test VTube-LASER to CNC Bender ProControl Communications

This video shows how to set up and test communications with the SMT CNC Bender ProControl benders.

Vtl v3.2b750 CNCBenderBenderlinkVideo.png


Version 3

Video 20210702: How To Enter Tangent Points to Define the Centerline in VTube

Michael Cone explains how the new Tangent Point Entry Grid feature allows operators to enter tangent-point-based centerline data in VTube-STEP and VTube-LASER.(Version 3 build 555, July 2, 2021)

20210702 TangentPointEntryGrid.png

Version 2.9.18

Video 100: How To Calculate the Centerline Radius in a Measured 180-degree Bend

This video shows how to use the Dimension Control window to calculate the true radius of a 180-degree bend.

Vtubestep v2.9.18.video calculate true radius 180-degree.png




Video 98: About the Small Diameter Warning

This video shows how Small Diameter Warning works along with its setup.

Vtubestep v2.9.18.video small diameter warning.png




Video 96: VTube-STEP and VTube-LASER New Radius Features

See the new radius features in this video. In Part Setup:

  • Renamed "Radius 1" (renamed from Default Radius)
  • New "Radius 2" field
  • New "Radius 3" field


In Parametric Tube grid windows:

  • See how to quickly set the radii for all bends using the synchronize radius feature.

Vtube v2.9.18.video newradius features.png



Version 2.9.17

Video 92: Measuring part "VTube-LASER Demo 5" with MicroScribe in Version 2.9.17

This video shows how to measure demo part 5 with version 2.9.17 of VTube-LASER. (Released in December 2018).

Vtl v2.9.17.video microscribe demo.png



Version 2.9.14

Video 89: MEASURING SMALL TUBES with MICROSCRIBE

This video shows how easy it is to measure small tubes with the MicroScribe i arm using VTube-LASER.

VTL MicroScribe Video 4.png


Version 2.9.9

Video 3: USING CONSTRUCT TUBE PROCESS to SCRIBE a CENTERLINE in SPACE

This video shows how to create draw the centerlines of a tube assembly in using CONSTRUCT TUBE measure process with the MicroScribe i arm.

VTL MicroScribe Video 2.png


Version 2.9.3

Video 2: MEASURING AN EVAPORATOR TUBE ASSEMBLY

This video shows a qualification measurement of an evaporator tube assembly.

VTL MicroScribe Video 2.png


Video 1: INTRODUCING VTUBE-LASER MEASURING WITH A MICROSCRIBE i ARM

As of January 2018, VTube-LASER can measure tubes with MicroScribe arms from Revware.

This video shows a reverse-engineer measurement of a two-tube assembly using a MicroScribe i arm.

VTL MicroScribe Video 1.png


Other Pages