Difference between revisions of "VTube-LASER Videos for HEXAGON ROMER"

Revision as of 19:33, 1 November 2017 (view source) Mcone (Talk | contribs) ← Older edit		Latest revision as of 20:16, 24 February 2023 (view source) Mcone (Talk | contribs) (→‎Version 4)
(121 intermediate revisions by one user not shown)
Line 3:		Line 3:
	<td width=300>		<td width=300>
−	See a complete list of VTube-LASER videos for HEXAGON ROMER arms on this page.<br><br>	+	See a list of VTube-LASER videos for ROMER Absolute Arms from HEXAGON on this page.<br><br>
−		+	* Back to [[VTube-LASER]] Knowledgebase Page<br>
−	* Back to [http://www.advancedtubular.com/vtube-laser.htm the Main VTube-LASER] web page<br><br>	+	* Back to the [[VTube-LASER Videos]] Page<br><br>
−	* Back to [[VTube-LASER]] Knowledgebase Page<br><br>	+
−	* Note: VTube-STEP is included with every VTube-LASER installation.  You can watch '''VTube-STEP videos''' in the [[VTube-STEP Videos]] page.	+
−	* See [[Retired VTube-LASER Videos]]	+
	</td>		</td>
	<td width=300>		<td width=300>
−	[[image:VTube-LASER_Videos_HEXAGON_ROMER.png.png|400px]]	+	[[image:VTube-LASER_Videos_HEXAGON_ROMER.png|400px]]
	</td>		</td>
	</tr>		</tr>
Line 19:		Line 16:
	__NOTOC__		__NOTOC__
−	===Version 2===
−	====Video 75: HOW TO USE ASSEMBLY CONTROL ====
−	<table width=600>	+
		+
		+
		+	===Version 4===
		+
		+	====Video 20230224: Proper End Straight Scanning Ensures Correct End Point Locations ====
		+	<table width=700>
	<tr>		<tr>
		+	<td width=300>
		+	Michael Cone, the lead developer for VTube-LASER shows how to get reliable end point locations from proper end straight scanning techniques.
	<td width=200>		<td width=200>
−	This video demonstrates the new ASSEMBLY CONTROL feature in version 2.9 of VTube-LASER. This feature allows you to import, measure, and align ANY number of tubes in one project.</td>	+	[[image:vtl_v4_ProperEndStraightScanningForGoodEndPoints.png|300px]]<br>
−	<td width=200>	+
−	[[image:vtube-laser_v2.9_assembly_video.png|200px]]<br>	+
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	* View on [https://vimeo.com/240579008 Vimeo]	+	* View video [https://www.advancedtubular.com/vtube-laser/20230224_TutorialForProperEndStraightScanning.mp4 MP4]
−	* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9_assembly_feature.mp4 MP4]	+	* View video [https://vimeo.com/802070332 Vimeo]
		+	* View video [https://youtu.be/p_ZVOR4DDC8 YouTube]
		+
	</td>		</td>
	</tr>		</tr>
	</table>		</table>
−	<br>
−	====Video 74: HOW TO CONNECT VTUBE-LASER TO A FARO ARM ====	+	====Video 20230206: How to learn, test, and use the DCP (Diameter Cut Plane) to measure tube straights that are near other objects ====
−		+	<table width=700>
−	<table width=600>	+
	<tr>		<tr>
		+	<td width=300>
		+	This video shows how to learn, test, and use the DCP feature to measure tubes that run near other objects.
	<td width=200>		<td width=200>
−	This video shows how to connect to the FARO arm and access the FARO driver windows from inside VTube-LASER.</td>	+	[[image:vtl_v4_DCPTutorial.png|300px]]<br>
−	<td width=200>	+
−	[[image:vtube-laser_v2.9_connect_to_faro_video.png|200px]]<br>	+
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	* View on [https://vimeo.com/239835411 Vimeo]	+	* View video [https://www.advancedtubular.com/vtube-laser/20230206_DiameterCutPlaneTutorial.mp4 MP4]
−	* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9_how_to_connect_faro_arm.mp4 MP4]	+	* View video [https://vimeo.com/796424925 Vimeo]
		+	* View video [https://youtu.be/CLcExwN-pTA YouTube]
		+
	</td>		</td>
	</tr>		</tr>
	</table>		</table>
−	<br>
−	====Video 73: MEASURING TUBE WITH ARMOR ====	+	====Video 20220908: Sneak Peek Preview - Shallow Bend Logic in Version 4====
−		+	<table width=700>
−	<table width=600>	+
	<tr>		<tr>
		+	<td width=300>
		+	This video shows a sneak peek of the new Shallow Bend logic coming in version 4 of VTube-LASER which increases bend point location placement by up to 10 times.
	<td width=200>		<td width=200>
−	Michael Cone shows how to setup VTube-LASER to measure tube with armor on the OD.</td>	+	[[image:vtl_v4_ShallowBendVideo_v2c.png|300px]]<br>
−	<td width=200>	+
−	[[image:vtube-laser_v2.9_tutorial_tubearmor_video.png|200px]]<br>	+
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	* View on [https://vimeo.com/234065972 Vimeo]	+	* View Video [https://www.advancedtubular.com/vtube-laser/20220906_VTube-LASER_v4_ShallowBendMeasureLogic.mp4 MP4]
−	* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9_tutorial_scanning_armor.mp4 MP4]	+	* View Video [https://vimeo.com/747812907 Vimeo]
		+	* View Video [https://youtu.be/ZosWxq4A4NU YouTube]
	</td>		</td>
	</tr>		</tr>
	</table>		</table>
−	<br>
		+	===Version 3.2===
−	====Video 72: VTUBE-LASER CORRECTING AN AIM WIRE BENDER ====	+	====Video 20220629: How Set Up to Correct SMI Benders with VTube-LASER====
−		+	<table width=700>
−	<table width=600>	+
	<tr>		<tr>
		+	<td width=300>
		+	This video shows set up VTube-LASER to correct SMI benders.
	<td width=200>		<td width=200>
−	This video was created by AIM MACHINES. It shows a user correcting a wire bender with the FARO arm using our VTube-LASER software.</td>	+	[[image:vtl_v3.2_SMIBenderCorrectionVideo.png|300px]]<br>
−	<td width=200>	+
−	[[image:VTube-LASER AIM Wire Bender Video.png|200px]]<br>	+
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	* View on [https://www.youtube.com/watch?v=N1EW8XtL2Uc YouTube]	+	* View [https://www.advancedtubular.com/vtube-laser/20220629_VTube-LASER_SMI_Corrections.mp4 MP4]
	</td>		</td>
	</tr>		</tr>
	</table>		</table>
−	<br>
−	====Video 71: HOW TO COMPARE SOLID MODELS TO PRINT DATA ====
−	<table width=600>	+	====Video 20220513: How To Measure Square Tube with VTube-LASER and the HEXAGON Scan Arm====
		+	<table width=700>
	<tr>		<tr>
		+	<td width=300>
		+	This video shows how to import square models, then measure, correct tube benders, and qualify square tube shapes using a HEXAGON scan arm and VTube-LASER.
	<td width=200>		<td width=200>
−	This is a tutorial that shows how to compare solid models to print data to determine if they are the same part.</td>	+	[[image:vtl_v3.2b755_SquareTubeVideo_Hexagon.png|300px]]<br>
−	<td width=200>	+
−	[[image:vtube-laser_v2.9_compare_models_to_print_video.png|200px]]<br>	+
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	* View on [https://vimeo.com/233024196 Vimeo]	+	* View [https://www.advancedtubular.com/vtube-laser/20220513_VTube-LASER_MeasureSquare_HEXAGON_ScanArm.mp4 MP4]
−	* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_compare_model_to_print_data.mp4 MP4]	+
	</td>		</td>
	</tr>		</tr>
	</table>		</table>
−	<br>
−	====Video 70: PROPER END-SCAN TECHNIQUE ====
−	<table width=600>	+	====Video 20220421: How To Set Up and Test VTube-LASER to CNC Bender ProControl Communications====
		+	<table width=700>
	<tr>		<tr>
		+	<td width=300>
		+	This video shows how to set up and test communications with the SMT CNC Bender ProControl benders.
	<td width=200>		<td width=200>
−	This is a tutorial that shows how to properly perform an end-scan with VTube-LASER. Follow these simple techniques to ensure that your end scans are reliable and accurate.</td>	+	[[image:vtl_v3.2b750_CNCBenderBenderlinkVideo.png|300px]]<br>
−	<td width=200>	+
−	[[image:vtube-laser_v2.9_endscan_tutorial_video.png|200px]]<br>	+
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	* View on [https://vimeo.com/232915028 Vimeo]	+	* View [https://www.advancedtubular.com/vtube-laser/20220421_VTube-LASER_to_CNC_Bender_Communications_Setup.mp4 MP4]
−	* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_2.9_endscan_tutorial.mp4 MP4]	+
	</td>		</td>
	</tr>		</tr>
	</table>		</table>
−	<br>
−	====Video 69: PATH MANAGER SEARCH AND MOVE ====
−	<table width=600>	+	====Video 20220331: Improved Best Fit For Shallow Bends====
		+	<table width=700>
	<tr>		<tr>
		+	<td width=300>
		+	This video shows how this version of VTube-LASER has an improved Best Fit algorithm designed to handle tubes with shallow bends.
	<td width=200>		<td width=200>
−	The PATH MANAGER is window that contains a list of paths that you want to access often in VTube-LASER.<br><br>	+	[[image:vtl_v3.2b714_BestFitShallowBend.png|300px]]<br>
−	This video shows how the new SEARCH and MOVE feature works in the PATH MANAGER.</td>	+
−	<td width=200>	+
−	[[image:vtube-laser_v2.8.5_pathmanager_searchandmove_video.png|200px]]<br>	+
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	* View on [https://vimeo.com/227189310 Vimeo]	+	* View [https://www.advancedtubular.com/vtube-laser/20220331_v3.2_b714_BestFitShallowBendLogic.mp4 MP4]
−	* View [https://www.advancedtubular.com/vtube-laser/VTube-LASER_2.8.5_PathManager_Search.mp4 MP4]	+	* View [https://vimeo.com/694643426 Vimeo]
	</td>		</td>
	</tr>		</tr>
	</table>		</table>
−	<br>
−	====Video 68: RECALLING and SENDING DATA with ADDATA ZMODEM PROTOCOL ====	+	===Version 3.1===
−	<table width=600>	+	====Video 20220113: How to Calculate VTube-LASER Tube Elongation Percentage====
		+	<table width=700>
	<tr>		<tr>
		+	<td width=300>
		+	This video shows how to calculate tube elongation percentage with VTube-LASER.
		+
	<td width=200>		<td width=200>
−	This is a 21-second video showing VTube-LASER communicating with a bender using the Addata ZModem protocol.<br><br>First, do a RECALL to update BLUE bender data columns from the bender. Second, SEND the ORANGE columns with corrected data to the bender.</td>	+	[[image:20220113_Video.png|300px]]<br>
−	<td width=200>	+
−	[[image:vtube-laser_v2.8.3_AddataZModem Video.png|200px]]<br>	+
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	* View on [https://vimeo.com/218967234 Vimeo]	+	* View [https://www.advancedtubular.com/vtube-laser/vtl_v3.1_training%20video%2015%20-%20How%20to%20Calculate%20the%20Tube%20Elongation%20Percentage.mp4 MP4]
−	* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.8.3_addata_zmodem_protocol.mp4 MP4]	+	* View [https://vimeo.com/665826780 Vimeo]
		+	* View [https://youtu.be/a0bc6IpbWb0  YouTube]
		+
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
−	<br>
−	====Video 67: When to use UNISCAN and MULTISCAN Scanning Modes in VTube-LASER ====
−	<table width=600>	+	====Video 20211207: VTube-LASER Correction for Han Jie Benders====
		+	<table width=700>
	<tr>		<tr>
		+	<td width=300>
		+	This video shows how easy it is to auto-correct an SMT Han Jie CNC bender (Version 3.1 build 638)
		+
	<td width=200>		<td width=200>
−	This video demonstrates how and why to switch from UNISCAN to MULTISCAN scanning modes and back.</td>	+	[[image:20211207_VTube-LASER_to_HanJie_Video.png|300px]]<br>
−	<td width=200>	+
−	[[image:vtube-laser_v2.8.1_uniscan_multiscan_demo_video.png|200px]]<br>	+
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	* View on [https://vimeo.com/216223092 Vimeo]	+	* View [https://www.advancedtubular.com/vtube-laser/VTube-LASER_HanJie_Promotional.mp4 MP4]
−	* View [https://www.advancedtubular.com/vtube-laser/vtube-laser-v2.8.1_uniscan_multiscan_demo.mp4 MP4]	+	* View [https://vimeo.com/654364120 Vimeo]
		+	* View [https://youtu.be/ym8LbFUpyow  YouTube]
		+
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
−	<br>
−	====Video 66: VTube-LASER Speed Test - LOAD PROJECT - SCAN - REPORT ====	+	===Version 3.0===
−	<table width=600>	+	====Video 20210702: How To Enter Tangent Points to Define the Centerline in VTube====
		+	<table width=700>
	<tr>		<tr>
		+	<td width=300>
		+	Michael Cone explains how the new Tangent Point Entry Grid feature allows operators to enter tangent-point-based centerline data in VTube-STEP and VTube-LASER.(Version 3 build 555, July 2, 2021)
		+
	<td width=200>		<td width=200>
−	This is a speed test on a 3 bend exhaust part.  The goal is show how easy it is to load a project and scan it in order to get a report.</td>	+	[[image:20210702_TangentPointEntryGrid.png|300px]]<br>
−	<td width=200>	+
−	[[image:vtube-laser_v2.8_speedtest_load-scan-report-video.png|200px]]<br>	+
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	* View on [https://vimeo.com/214339083 Vimeo]	+	* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_b555_tangent_point_entry_grid.mp4 MP4]
−	* View [http://www.advancedtubular.com/vtube-laser/Vtube-LASER_v2.8_LoadProjectMeasure_SpeedTest.mp4 MP4]	+	* View [https://vimeo.com/571874446 Vimeo]
		+	* View [https://youtu.be/C9yLbhoWlSE  YouTube]
		+
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
−	<br>
−	====Video 65: Introducton to the PRECISION WEIGHT CONTROL Alignment ====	+	====Video 20210622: Get Great End Scans Using Flier Filters in VTube-LASER====
−		+	<table width=700>
−	<table width=600>	+
	<tr>		<tr>
		+	<td width=300>
		+	Michael Cone explains the End Scan Flier Filter feature that automatically removes fliers from end scans. (Version 3 build 542, June 22, 2021)
		+
	<td width=200>		<td width=200>
−	Precision Weight Control Alignment allows you to take-over the weighting of every straight section in a VTube-LASER tube. See how the feature works in this video.</td>	+	[[image:20210622_End_Scan_Flier_Filter_Promo.png|300px]]<br>
−	<td width=200>	+
−	[[image:vtube-laser_v2.8_pwc_alignment_video.png|200px]]<br>	+
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	* View on [https://vimeo.com/214338942 Vimeo]	+	* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_endscanflierfilter_promo.mp4 MP4]
−	* View [http://www.advancedtubular.com/vtube-laser/vtube-laser_v2.8_precisionweightcontrol_alignment.mp4 MP4]	+	* View [https://vimeo.com/567104555 Vimeo]
		+	* View [https://youtu.be/RfWxFa6fEFk  YouTube]
		+
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
−	<br>	+	<br><br>
−	====Video 64: Introduction to the DUAL CYLINDER FIT Feature for Scanning ====	+	====Video 20210505: How To Determine Positive and Negative Rotation Directions====
−		+	<table width=700>
−	<table width=600>	+
	<tr>		<tr>
		+	<td width=300>
		+	Michael Cone explains how to determine if the rotation direction on your CNC bender matches the rotation direction in VTube.
		+
	<td width=200>		<td width=200>
−	This video shows why the Dual Cylinder Fit feature is a ground-breaking addition to VTube-LASER. If you scan tube shapes, then you should upgrade to this version of VTube-LASER immediately. Watch the video to see why.</td>	+	[[image:20210505_Positive_Rotation_Direction.png|300px]]<br>
−	<td width=200>	+
−	[[image:vtube-laser_v2.8_dualcylinderfit_intro_video.png|200px]]<br>	+
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	* View on [https://vimeo.com/214338497 Vimeo]	+	* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_positive_rotation_direction.mp4 MP4]
−	* View [http://www.advancedtubular.com/vtube-laser/VTube-LASER_v2.8_dualcylinderfit_feature_introduction.mp4 MP4]	+	* View [https://vimeo.com/545519786 Vimeo]
		+	* View [https://youtu.be/CL7L-rZbVDQ YouTube]
		+
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
	<br><br>		<br><br>
−	====Video 63: Quick Demo of ORBIT Control Window ====	+	====Video 20210503: Automatic Reverse Calc====
−		+	<table width=700>
−	<table width=600>	+
	<tr>		<tr>
		+	<td width=300>
		+	Michael Cone explains the new Automatic Reverse Calc in VTube version 3 build 513.
		+
	<td width=200>		<td width=200>
−	This is a quick demo of the ORBIT Control window that was released in version 2.8.</td>	+	[[image:20210503_AutomaticReverseCalcVideo.png|300px]]<br>
−	<td width=200>	+
−	[[image:vtube-laser_v2.8_orbitcontrolwindow_video.png|200px]]<br>	+
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	* View [http://www.advancedtubular.com/vtube-laser/vtube-laser_v2.8_orbitcontrolwindow.mp4 MP4]	+	* View [https://www.advancedtubular.com/vtube-laser/vt_v3_b513_automatic_reverse_calc.mp4 MP4]
		+	* View [https://vimeo.com/545518519 Vimeo]
		+	* View [https://youtu.be/-rh5eNA8tIA YouTube]
		+
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
	<br><br>		<br><br>
−	====Video 62: Setup and Correct SOCO Benders with VTube-LASER Communications ====
−	<table width=600>	+	====Video 20210421: Why and How to Use MTA (Measured Tube Averaging)====
		+	<table width=700>
	<tr>		<tr>
		+	<td width=300>
		+	Michael Cone shows the why and how of MTA.
		+
	<td width=200>		<td width=200>
−	Created at Tube Form Solutions, this video demonstrates VTube-LASER being used to setup a SOCO bender from a solid model, then correcting the bend program through a network connection by measuring the tube shape and sending correction data to the bender.	+	[[image:20210421_MTAVideo.png|300px]]<br>
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	[[image:vtube-laser_2.6_soco_communications_video.png|200px]]<br>	+	* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_mta_tutorial.mp4 MP4]
−	</td>	+	* View [https://vimeo.com/541156704 Vimeo]
−	<td width=200>	+	* View [https://youtu.be/gGSAR-a6m3Q YouTube]
−	* View [https://youtu.be/D36caUYI-z4 YouTube]	+
−	* View [http://www.advancedtubular.com/vtube-laser/vtube-laser_v2.7_soco_commmunications.mp4 MP4]	+
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
	<br><br>		<br><br>
−	====Video 61: Setup and Correct Alpine Benders with VTube-LASER Network Communications ====	+	====Video 202100413: VTube v3 NPS Values Tutorial====
−		+	<table width=700>
−	<table width=600>	+
	<tr>		<tr>
		+	<td width=300>
		+	Michael Cone shows how to use the new NPS values in VTube.
		+
	<td width=200>		<td width=200>
−	Created at Elite Tube & Fabrication, this video demonstrates VTube-LASER being used to setup an Alpine bender from a solid model, then correcting the bend program through a network connection by measuring the tube shape and sending correction data to the bender.	+	[[image:20210413_NPSVideo.png|300px]]<br>
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	[[image:vtube-laser_video_correcting_alpine_bender.png|200px]]<br>	+	* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_nps_tutorial.mp4 MP4]
−	</td>	+	* View [https://vimeo.com/536497747 Vimeo]
−	<td width=200>	+	* View [https://youtu.be/RcKawANCpWY YouTube]
−	* View [https://youtu.be/2zX5ug7Lnxk YouTube]	+
−	* View [http://www.advancedtubular.com/vtube-laser/vtube-laser_v2.6_correcting_alpine_bender.mp4 MP4]	+
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
	<br><br>		<br><br>
−	====Video 60: Diameter Cut Plane - Quick Tutorial ====	+	====Video 202100406: VTube-LASER Reverse Engineering Tutorial====
−	<table width=600>	+	<table width=700>
	<tr>		<tr>
		+	<td width=300>
		+	Michael Cone shows how easy it is to reverse engineer a tube shape with VTube-LASER.
		+
	<td width=200>		<td width=200>
−	Michael Cone explains the concept behind the DCP (Diameter Cut Plane) feature and demonstrates how it works.  This is a new innovation added in version 2.6.	+	[[image:20210406_ReverseEngineeringVideo.png|300px]]<br>
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	[[image:DCPtutorialVideo.png|200px]]<br>	+	* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_reverse_engineering_tutorial.mp4 MP4]
−	</td>	+	* View [https://vimeo.com/533692712 Vimeo]
−	<td width=200>	+	* View [https://youtu.be/7N_-0d_Mjp4 YouTube]
−	* View [https://vimeo.com/195516874 Vimeo]	+
−	* View [http://www.advancedtubular.com/vtube-laser/vtube-laser_v2.6_dcp_tutorial_demo.mp4 MP4]	+
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
	<br><br>		<br><br>
−	====Video 59: Diameter Cut Plane - Quick Demo ====	+	====Video 20210330: VTube-LASER to Transfluid Bender Communications====
−	<table width=600>	+	<table width=700>
	<tr>		<tr>
		+	<td width=300>
		+	This video shows how easy it is to communicate with Transfluid tProject bender software.
		+
	<td width=200>		<td width=200>
−	This video shows what you can do with the DCP (Diameter Cut Plane) feature added in version 2.6. With DCP, even if the laser stripe is crosses multiple straights at the same time, it finds and keeps the closest one - on-the-fly. It even filters out non-diameter objects that are behind the top diameter.	+	[[image:20210330_TransfluidTProjectCommunications.png|300px]]<br>
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	[[image:vtube-laser_v2.6_cutplane_video.png|200px]]<br>	+	* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_transfluid_tproject_communications.mp4 MP4]
−	</td>	+	* View [https://vimeo.com/531073455 Vimeo]
−	<td width=200>	+
−	* View [https://youtu.be/sAcJ7sETzlc YouTube]	+
−	* View [http://www.advancedtubular.com/vtube-laser/vtube_laser_2.6_dcp_demo.mp4 MP4]	+
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
	<br><br>		<br><br>
−	====Video 58: Speed Test - Reverse Engineer to SOLIDWORKS in Less than 60 Seconds ====	+	====Video 20210313: How to Enter Bender Data of Different Types in the Same Project====
−	<table width=600>	+	<table width=700>
	<tr>		<tr>
		+	<td width=300>
		+	This video shows how to enter bender data of mixed data types and then reverse calc to centerline XYZ data.
		+
	<td width=200>		<td width=200>
−	This video shows how fast VTube-LASER can reverse engineer a tube and build it in SOLIDWORKS - including BEND PROFILE measurements to measure the radius values.  The version of VTube-LASER in this video is 2.5.	+	[[image:20210313_ImportMixedBenderData.png|300px]]<br>
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	[[image:vtube-laser_v2.5_speedtest_reverse_to_solidworks_video.png|200px]]<br>	+	* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_entering_mixed_bender_data_types.mp4 MP4]
−	</td>	+	* View [https://vimeo.com/523279713 Vimeo]
−	<td width=200>	+
−	* View [https://vimeo.com/195520326 Vimeo]	+
−	* View [http://www.advancedtubular.com/vtube-laser/vtube-laser_v2.5_reverseengineering_to_solidworks_speedtest.mp4 MP4]	+
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
	<br><br>		<br><br>
−	====Video 57: How To COMPLETELY Reverse Engineer a Tube with the New BEND PROFILE Feature ====	+	====Video 20210310: How to Import New Report Templates====
−	<table width=600>	+	<table width=700>
	<tr>		<tr>
		+	<td width=300>
		+	This video shows how to import new report templates into VTube-STEP and VTube-LASER.
		+
	<td width=200>		<td width=200>
−	This video shows how to measure a bend profile to calculate the true radius during reverse engineering of a tube.  The version of VTube-LASER in this video is 2.5.	+	[[image:20210310_ImportReportTemplates.png|300px]]<br>
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	[[image:VTube-LASER_BendProfile_Reverse_Radius_video.png|200px]]<br>	+	* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_importingreporttemplates.mp4 MP4]
−	</td>	+	* View [https://vimeo.com/522027683 Vimeo]
−	<td width=200>	+
−	* View [https://youtu.be/4UF3uL1vzD0 YouTube]	+
−	* View [http://www.advancedtubular.com/vtube-laser/vtube-laser_v2.5_bendprofile_radius_reverse_engineering.mp4 MP4]	+
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
	<br><br>		<br><br>
−	====Video 56: How to Manually Setup for Measuring Split Bends from Traditional Part Data (180-Degree Bends) ====	+
−	<table width=600>	+	====Video 20201221: VTube-LASER Five-minute Bender Correction for UTE Select (HEXAGON)====
		+	<table width=700>
	<tr>		<tr>
		+	<td width=300>
		+	See how to correct a tube shape in a UTE SELECT bender in less than 5 minutes.
		+
	<td width=200>		<td width=200>
−	This video shows how to setup Split Bend for measuring 180-degree bends from parts defined in prints.  The version of VTube-LASER in this video is 2.5.	+	[[image:20201221_UTESelectCorrectionVideo.png|300px]]<br>
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	[[image:VTube-LASER_SplitBendSetup_FromPartData_video.png|200px]]<br>	+	* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_UTE_Select_Corrections_Hexagon.mp4 MP4]
−	</td>	+	* View [https://vimeo.com/493550553 Vimeo]
−	<td width=200>	+
−	* View [https://youtu.be/jmPViDzwbWk YouTube]	+
−	* View [http://www.advancedtubular.com/vtube-laser/vtube-laser_v2.5_splitbendsetup_fromprintdata.mp4 MP4]	+
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
	<br><br>		<br><br>
−	====Video 55: How to Use Bender Data to Setup the Master Part ====	+	====Video 20201111B: Automatic Copy of the Default Tolerance to Tube Straights====
−	<table width=600>	+	<table width=700>
	<tr>		<tr>
		+	<td width=300>
		+	Learn how automatically copy the edited default tangent/midpoint tolerance to all the tube straights.
		+
	<td width=200>		<td width=200>
−	Sometimes it's necessary to setup the master part from bender data rather than the normal solid model import or the manual entry of centerline XYZ coordinates.<br><br>	+	[[image:20201111B_autocopydefaulttolerance.png|300px]]<br>
−	This video shows you how to do that.  The version of VTube-LASER in this video is 2.5.	+
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	[[image:VTube-LASER_ReverseCalc_video.png|200px]]<br>	+	* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_automatic_copy_of_default_tolerance.mp4 MP4]
		+	* View [https://vimeo.com/478271550 Vimeo]
		+
	</td>		</td>
		+	</tr>
		+
		+	</table>
		+	<br><br>
		+
		+	====Video 20201111: How to Use Precision Weight Control Alignment to Simulate Zero-Tolerance Gauges====
		+	<table width=700>
		+	<tr>
		+	<td width=300>
		+	Learn how to use Precision Weight Control Alignment in VTube-LASER to better simulate zero-tolerance gauges.
		+
	<td width=200>		<td width=200>
−	* View [https://youtu.be/DSMt4eDGnok YouTube]	+	[[image:20201111_precisionweightcontrolalignment.png|300px]]<br>
−	* View [http://www.advancedtubular.com/vtube-laser/vtube-laser_v2.5_enter_master_bender_data.mp4 MP4]	+	</td>
		+	<td width=300>
		+	* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_precision_weight_control_alignment.mp4 MP4]
		+	* View [https://vimeo.com/478127038 Vimeo]
		+
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
	<br><br>		<br><br>
−	====Video 54: How to Calibrate the FARO Probes in VTube-LASER ====	+
−	<table width=600>	+	====Video 20200930: How to Measure and Qualify OD End Profiles Using Assembly (HEXAGON)====
		+	<table width=700>
	<tr>		<tr>
		+	<td width=300>
		+	This video shows how to use Assembly to measure and qualify OD end profiles using a HEXAGON arm.
		+
	<td width=200>		<td width=200>
−	Calibrated FARO probes is a foundational skill that is critical for successful measurements.<br><br>This video shows how to calibrate the probes and laser scanners from inside VTube-LASER.<br><br>	+	[[image:20200930_measuring_od_end_profiles.png|300px]]<br>
−	The version of VTube-LASER shown in the video is 2.3.	+
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	[[image:vtube_calibratingprobes_video.png|200px]]<br>	+	* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_qualifying_endscan_profiles_hexagon.mp4 MP4]
		+	* View [https://vimeo.com/463607514 Vimeo]
	</td>		</td>
		+	</tr>
		+
		+	</table>
		+	<br><br>
		+
		+
		+	====Video 20200924: How to Measure and Qualify Ports on a Tube Using Assembly (HEXAGON)====
		+	<table width=700>
		+	<tr>
		+	<td width=300>
		+	This video shows how to use Assembly to measure and qualify ports attached to a tube using VTube-LASER. The same principle can be extended to holes in tube shapes.
		+
	<td width=200>		<td width=200>
−	* View [https://youtu.be/JL4FS1EqDoA YouTube]	+	[[image:20200923_measureing_tubes_with_ports_hexagon.png|300px]]<br>
−	* View [http://www.advancedtubular.com/vtube-laser/vtube-laser_v2.3_faro_probe_calibration.mp4 MP4]	+	</td>
		+	<td width=300>
		+	* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_measuring_tubes_with_ports_hexagon.mp4 MP4]
		+	* View [https://vimeo.com/461988796 Vimeo]
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
	<br><br>		<br><br>
−	====Video 53: Introductory Training in VTube-LASER Version 2 ====	+	====Video 20200722: Scanning Tube with a Legacy ROMER Scan Arm====
−	<table width=600>	+	<table width=700>
	<tr>		<tr>
		+	<td width=300>
		+	This video shows VTube-LASER using an older RS-7520-SI arm with a version 1 scanner.
		+
	<td width=200>		<td width=200>
−	This video is designed for FARO account managers - but it's also good for customers with new users that need to learn how to use VTube-LASER.<br><br>It shows how to use the training/demo document for VTube-LASER for training and for giving demonstrations.<br><br>	+	[[image:20200722_RA7520_video.png|300px]]<br>
−	You can download the training document from [http://advancedtubular.com/customers/vtube/page-downloads/training-documents.html this page].<br><br>	+
−	The version of VTube-LASER shown in the video is 2.3.	+
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	[[image:vtube_trainingdocument_video.png|200px]]<br>	+	* Download [https://vimeo.com/440788274 Vimeo]
		+	* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_ra-7520_SI_ScanningTube.mp4 MP4]
		+
	</td>		</td>
		+	</tr>
		+
		+	</table>
		+	<br><br>
		+
		+	====Video 20200709: Real-time Overall Scan Scores Build Confidence====
		+	<table width=700>
		+	<tr>
		+	<td width=300>
		+	This video shows how VTube-LASER scan scoring system helps users know they are measuring well.
		+
	<td width=200>		<td width=200>
−	* View [https://vimeo.com/195511032 Vimeo]	+	[[image:20200709_scanscore_video.png|300px]]<br>
−	* View [http://www.advancedtubular.com/vtube-laser/VTube-LASER_v2.3_initial_training.mp4 MP4]	+	</td>
		+	<td width=300>
		+	* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_realtime_scanscore.mp4 MP4]
		+
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
	<br><br>		<br><br>
−	====Video 51: Changing the Part Shape by Changing Bender Data====	+	====Video 20200609: How to Use Multiple Versions of the Same Part in One Project====
−	<table width=600>	+	<table width=700>
	<tr>		<tr>
		+	<td width=300>
		+	This video shows how to use Assembly to create multiple versions of the same part in one project.  Each version can then be used to measure the part at various stages of the fabrication process.
		+
	<td width=200>		<td width=200>
−	See how easy it is to quickly change the part shape by editing the bender data.<br><br>	+	[[image:20200609_multiple_versions_parts_video.png|300px]]<br>
−	The version of VTube-LASER shown in the video is 2.2.	+
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	[[image:vtube_reversecalc_video.png|200px]]<br>	+	* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_multiple_versions_of_same_part.mp4 MP4]
		+
	</td>		</td>
		+	</tr>
		+
		+	</table>
		+	<br><br>
		+
		+	====Video 20200515: How Import 180-degree Bend Models====
		+	<table width=700>
		+	<tr>
		+	<td width=300>
		+	This video shows how to import models with 180-degree bends.
		+
	<td width=200>		<td width=200>
−	* View [https://youtu.be/zKPFCDMFV_Q YouTube]	+	[[image:20200515_import180_video.png|300px]]<br>
−	* View [http://www.advancedtubular.com/vtube-laser/vtube-v2.2_reversecalc_thats_easy_too.mp4 MP4]	+	</td>
		+	<td width=300>
		+	* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_import_180-degree_bend_models.mp4 MP4]
		+
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
	<br><br>		<br><br>
−	====Video 50: VTube User Interface Scan Sounds====
−	<table width=600>	+	====Video 20200514: How to Change Languages in VTube====
		+	<table width=700>
	<tr>		<tr>
		+	<td width=300>
		+	This video shows how to change languages in the VTube-LASER and VTube-STEP user interface.
		+
	<td width=200>		<td width=200>
−	This video shows VTube-LASER User Interface scan sounds.<br><br>	+	[[image:20200514_changelanguges_video.png|300px]]<br>
−	Sounds are an important part of the user interface in VTube.  They are designed to give the operators auditory feed back so that they can keep their eyes focused on the part.	+
−	<br><br>	+
−	The version of VTube-LASER shown in the video is 2.2.	+
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	[[image:vtube-laser-v2.2_video_scansounds.png|200px|link=http://www.advancedtubular.com/vtube-laser/vtube-laser-v2.2_user_interface_sounds.mp4]]<br><br>	+	* View [https://www.advancedtubular.com/vtube-laser/vtl_v3_change_languages.mp4 MP4]
		+
	</td>		</td>
		+	</tr>
		+
		+	</table>
		+	<br><br>
		+
		+	====Video 20200331: VTube UNIVERSITY Training Video: Verify a HEXAGON Arm with a Precision Cylinder Bar====
		+	<table width=700>
		+	<tr>
		+	<td width=300>
		+	This is a VTube University video that shows how to quickly verify a HEXAGON ScanArm with VTube-LASER and a precision cylinder bar.
		+
	<td width=200>		<td width=200>
−	* View [https://youtu.be/o2nu0DT1q0Q YouTube]	+	[[image:20200331_training_hexagon_video.png|300px]]<br>
−	* View [http://www.advancedtubular.com/vtube-laser/vtube-laser-v2.2_user_interface_sounds.mp4 MP4]	+	</td>
		+	<td width=300>
		+	* View [https://vimeo.com/402756704 Vimeo]
		+	* Download [https://vimeo.com/advancedtubular/download/402756704/45b8f394d8 Vimeo]
		+	* View [https://www.advancedtubular.com/vtube-laser/vtl3_verify_hexagon_with_cyl_length_bar.mp4 MP4]
		+
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
		+	<br><br>
−	====Video 49: Measuring a Tube Gauge====	+	====Video 20200320: VTube UNIVERSITY Training Video: End Scans====
−	<table width=600>	+	<table width=700>
	<tr>		<tr>
−	<td width=200>	+	<td width=300>
−	This video shows how to measure a tube gauge with VTube-LASER.<br><br>	+	This video is a VTube University video designed to show how to effectively end scan a tube using VTube-LASER.
	</td>		</td>
	<td width=200>		<td width=200>
−	[[image:vtube-laser_v2.2_measure_tube_gauges_video.png|200px|link=http://www.advancedtubular.com/vtube-laser/vtube-laser_v2.2_measuring_tube_gauges.mp4]]<br><br>	+	[[image:vtl_v3.0_training_endscan_technique.png|300px]]<br>
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	* View [https://youtu.be/jzXTeulLoBI YouTube]	+	* View [https://vimeo.com/399358340 Vimeo]
−	* View [http://www.advancedtubular.com/vtube-laser/vtube-laser_v2.2_measuring_tube_gauges.mp4 MP4]	+	* View [https://youtu.be/qb9G15eQGpk YouTube]
		+	* View [https://www.advancedtubular.com/vtube-laser/20200320_VTubeUniversity_vtl_v3_endscan_technique_rev2.mp4 MP4]
		+
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
		+	<br><br>
−	====Video 48: Reverse-Engineering Demonstrated====	+	====Video 20200309: Corrections with the OMCG Wire Bender====
−	<table width=600>	+	<table width=700>
	<tr>		<tr>
−	<td width=200>	+	<td width=300>
−	This video shows how to reverse engineer a tube shape with VTube-LASER.<br><br>	+	This video shows a corrections loop between VTube-LASER and an OMCG wire bender.
	</td>		</td>
	<td width=200>		<td width=200>
−	[[image:vtube-step-2.2_reverse-engineer_video.png|200px|link=http://www.advancedtubular.com/vtube-laser/vtube-laser_v2.2_reverse_engineer_demonstration.mp4]]<br><br>	+	[[image:vtl_v3.0_correct_OMCG.mp4.png|300px]]<br>
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	* View [https://youtu.be/5Sqf3v4RRh0 YouTube]	+	* View [https://youtu.be/xFtyRToRwFY YouTube]
−	* View [http://www.advancedtubular.com/vtube-laser/vtube-laser_v2.2_reverse_engineer_demonstration.mp4 MP4]	+	* View [https://vimeo.com/396590418 Vimeo]
		+	* View [https://www.advancedtubular.com/vtube-laser/20200306_VTube-LASER_to_OMCG_Corrections_at_Ohio_Precision_Products.mp4 MP4]
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
		+	<br><br>
−	====Video 47: MultiScan Measuring Technique====	+	====Video 20200225: How to manually setup the Ethernet port for HEXAGON RDS connection====
−	<table width=600>	+	<table width=700>
	<tr>		<tr>
−	<td width=200>	+	<td width=300>
−	This video shows the MultiScan measuring technique.<br><br>	+	You can manually setup the Ethernet port following the steps in this short video.
	</td>		</td>
	<td width=200>		<td width=200>
−	[[image:vtube-laser_v2.2_multiscan_video.png|200px|link=http://www.advancedtubular.com/vtube-laser/vtube-laser-v2.2_multiscan_demo.mp4]]<br><br>	+	[[image:vtl_v3.0_setupethnernetHEXAGON.mp4.png|300px]]<br>
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	* View [http://www.advancedtubular.com/vtube-laser/vtube-laser-v2.2_multiscan_demo.mp4 MP4]	+	* View [https://www.advancedtubular.com/vtube-laser/20200225_vtl_v3_Windows10_Ethernet_Setup_For_HEXAGON_RDS.mp4 MP4]
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
		+	<br><br>
−	====Video 46: How to Measure Straights With Brackets And Other Objects====	+	====Video 20200206: How to Switch from Probe to LASER with HEXAGON RA8 Arms====
−	<table width=600>	+	<table width=700>
	<tr>		<tr>
−	<td width=200>	+	<td width=300>
−	This video shows how to scan around objects on a tube straight.<br><br>	+	Switching from probe to laser is easy with the three-way toggle button.
		+
		+	(Using a HEXAGON RA8 ScanArm)
	</td>		</td>
	<td width=200>		<td width=200>
−	[[image:vtubelaser_v2.2_scanaroundobjects.png|200px|link=http://www.advancedtubular.com/vtube-laser/vtube-laser-v2.2_measure_around_objects.mp4]]<br><br>	+	[[image:vtl_v3.0_switchingprobesHEXAGON.mp4.png|300px]]<br>
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	* View [http://www.advancedtubular.com/vtube-laser/vtube-laser-v2.2_measure_around_objects.mp4 MP4]	+	* View [https://vimeo.com/389798661 Vimeo]
		+	* View [https://www.advancedtubular.com/vtube-laser/20200206_vtl_v3.0_how%20to%20switch%20from%20ball%20to%20laser%20in%20HEXAGON%20RS8%20Arms.mp4 MP4]
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
		+	<br><br>
−	====Video 45: How to Measure Previous Straights Again====	+	===Version 2.9.21===
−	<table width=600>	+
		+	====Video 20200114: How to Use VTube-LASER Corner Profile Measure Process for Different Tube Profiles====
		+
		+	<table width=700>
	<tr>		<tr>
−	<td width=200>	+	<td width=300>
−	This video shows how repeat a measurement of previous straights.<br>	+	See how to use VTube-LASER Corner Profile measurement for PROFILE, SQUARE, RECTANGULAR, and EXTRUDED shapes - with either the LASER or the BALL PROBE.
−	It also shows you how to skip ahead for over straights that have already been measured.</td>	+
−	<td width=200>	+	(Using a HEXAGON 8325 ScanArm)
−	[[image:vtube-laser_v2.2_video_previous_straights_measures.png|200px|link=http://www.advancedtubular.com/vtube-laser/vtube-laser_v2.2_previousmeasures.mp4]]<br><br>	+
	</td>		</td>
	<td width=200>		<td width=200>
−	* View [http://www.advancedtubular.com/vtube-laser/vtube-laser_v2.2_previousmeasures.mp4 MP4]	+	[[image:vtubelaser_v2.9.21.video_corner_profiles_002.png|300px]]<br>
		+	</td>
		+	<td width=300>
		+	* View [https://vimeo.com/384896663 Vimeo]
		+	* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.21_cornerprofile_demo_2.mp4 MP4]
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
		+	<br><br>
−	====Video 44: Entering LRA Data to Establish the Master Data====
−	<table width=600>	+
		+	====Video 107: Corrections Loop with SOCO Beckhoff Controls====
		+
		+
		+	<table width=700>
	<tr>		<tr>
−	<td width=200>	+	<td width=300>
−	This quick video shows how to enter LRA bender data to establish the MASTER data for a part.<br><br>	+	This demo video shows how VTube-LASER performs corrections loop communications with SOCO Beckhoff controls.
−	We refer to the calculation required as "Reverse Calculation" because it reverses the normal direction of calculation in VTube so that the centerline XYZ data after the LRA data is entered.	+
	</td>		</td>
	<td width=200>		<td width=200>
−	[[image:vtube-laser_v2.2_video_enterLRAData.png|200px|link=http://www.advancedtubular.com/vtube-laser/vtube-laser-v2.2_EnterLRAmaster.mp4]]<br><br>	+	[[image:vtubelaser_v2.9.21.video_soco_beckhoff_communications.png|300px]]<br>
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	* View [http://www.advancedtubular.com/vtube-laser/vtube-laser-v2.2_EnterLRAmaster.mp4 MP4]	+	* View [https://vimeo.com/356003359 Vimeo]
		+	* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.21_SOCO_SV-M_Protocol.mp4 MP4]
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
		+	<br><br>
−	====Video 43: Wire-form Measuring - 20-second Import and 16-second Measure====	+	===Version 2.9.19===
−	<table width=600>	+	====Video 104: Demo of VTube-LASER Measuring from 2mm to 450mm Tube and Pipe + Square====
		+
		+
		+	<table width=700>
	<tr>		<tr>
−	<td width=200>	+	<td width=300>
−	For applications that are time-critical, this video shows how VTube-LASER can import and measure tubes very quickly.<br><br>	+	This demo video shows the wide range of tube, pipe, wire, string types that VTube-LASER can scan with a laser scanner arm.
−	Click on the image to watch a video with timers. The part in this video is a '''wire-form'''.<br><br>	+
	</td>		</td>
	<td width=200>		<td width=200>
−	[[image:vtube-laser_v2.2_video_multiscan_speedtest.png|200px|link=http://www.advancedtubular.com/vtube-laser/vtube-laser-v2.2_speedtest_multiscan.mp4]]<br><br>	+	[[image:vtubestep_v2.9.19.video_different_tube_types_scanned.png|300px]]<br>
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	* View [https://youtu.be/ePlxcFsmTXw YouTube]	+	* View [https://www.vimeo.com/332490313 Vimeo]
−	* View [http://www.advancedtubular.com/vtube-laser/vtube-laser-v2.2_speedtest_multiscan.mp4 MP4]	+	* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.19_quickscan_multiple_part_types.mp4 MP4]
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
		+	<br><br>
−	====Video 42: How To Use a Solid Model to Build VTube-LASER MASTER Data====	+	====Video 103: VTube-LASER "Timer Accept" Feature Cuts Button Press Counts in Half====
−	<table width=600>	+
		+	<table width=700>
	<tr>		<tr>
−	<td width=200>	+	<td width=300>
−	Click on the image to see a video on how to build VTube-LASER MASTER data from a solid model<br><br>	+	This video shows how the TIMER ACCEPT button can decrease your button presses during UniScan tube measuring by half.
	</td>		</td>
	<td width=200>		<td width=200>
−	[[image:vtube-laser_v2.2_video_usemodel_for_master.png|200px|link=http://www.advancedtubular.com/vtube-laser/VTube-laser-v2.2_masterdata_transferred_to_laser.mp4]]<br><br>	+	[[image:vtubestep_v2.9.19.video_timer_accept_button.png|300px]]<br>
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	* View [https://youtu.be/aPyZk3Mg8sc YouTube]	+	* View [https://www.vimeo.com/332124282 Vimeo]
−	* View [http://www.advancedtubular.com/vtube-laser/VTube-laser-v2.2_masterdata_transferred_to_laser.mp4 MP4]	+	* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.19_accepttimer.mp4 MP4]
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
		+	<br><br>
−	====Video 41: Winton Bender Corrections Loop Video====	+	===Version 2.9.18===
−	<table width=600>	+
		+	====Video 100: How To Calculate the Centerline Radius in a Measured 180-degree Bend ====
		+
		+
		+	<table width=700>
	<tr>		<tr>
−	<td width=200>	+	<td width=300>
−	Click on the image to see a 60 second video on how correction loops work with the Winton RD bender:<br><br>	+	This video shows how to use the Dimension Control window to calculate the true radius of a 180-degree bend.
	</td>		</td>
	<td width=200>		<td width=200>
−	[[image:vtube-laser_2.2_winton_correction_loop_video.png|200px|link=http://www.advancedtubular.com/vtube-laser/vtube-laser_v2.2_winton_rd_correction.mp4]]<br><br>	+	[[image:vtubestep_v2.9.18.video_calculate_true_radius_180-degree.png|300px]]<br>
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	* View [https://youtu.be/gedu2v-lfHI YouTube]	+	* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.18_measure_180_degree_bend_radius.mp4 MP4]
−	* View [http://www.advancedtubular.com/vtube-laser/vtube-laser_v2.2_winton_rd_correction.mp44 MP4]	+
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
		+	<br><br>
−	====Video 40: Sixty Second SPLIT BEND Feature Demo====	+
−	<table width=600>	+	====Video 99: See VTube-LASER Reverse Engineer a RZR Side by Side Custom Tube Assembly using a HEXAGON RA8 Arm ====
		+
		+
		+	<table width=700>
	<tr>		<tr>
−	<td width=200>	+	<td width=300>
−	It's easy and it's accurate:  VTube-LASER measures 180 degree bends using a very accurate and unique SPLIT BEND feature.<br><br>	+	This video shows Michael Cone using VTube-LASER to reverse engineer a custom 8 tube assembly for a RZR Side by Side in 8 minutes - including sending the part to SOLIDWORKS.
−	This video shows how easy it is to use the feature with the FARO scanner.<br><br>	+
	</td>		</td>
	<td width=200>		<td width=200>
−	[[image:vtube-laser-2.2_splitbend_video.png|200px]]	+	[[image:vtubestep_v2.9.18.video_reverse_RZR_side_by_side.png|300px]]<br>
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	* View [http://youtu.be/ob_ix8xl7pw YouTube]	+	* View [https://vimeo.com/320630910 Vimeo]
−	* View [http://www.advancedtubular.com/vtube-laser/vtube-laser-2.2_splitbend_measure.mp4 MP4]	+	* View [https://youtu.be/Qpn8Iyl_RwU YouTube]
		+	* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.18_reverse_rzr_side_by_side.mp4 MP4]
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
		+	<br><br>
−	====Video 39: Measuring the Demo Tube 3 Radius With the Ball Probe====	+	====Video 98: About the Small Diameter Warning  ====
−	<table width=600>	+
		+
		+	<table width=700>
	<tr>		<tr>
−	<td width=200>	+	<td width=300>
−	Measuring the radius with a ball probe is very consistent if done properly.<br><br>	+	This video shows how Small Diameter Warning works along with its setup.
−	This video shows how to measure the radius with a ball probe to determine a good default radius during reverse engineering.<br><br>	+
	</td>		</td>
	<td width=200>		<td width=200>
−	[[image:vtube-laser-2.1_radius_measure_ballprobe_video.png|200px]]	+	[[image:vtubestep_v2.9.18.video_small_diameter_warning.png|300px]]<br>
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	* View [http://www.advancedtubular.com/vtube-laser/vtube-laser_2.1_radius_measure.mp4 MP4]	+	* View [https://vimeo.com/320355578 Vimeo]
		+	* View [https://youtu.be/uT_PN-lNsz8 YouTube]
		+	* View [https://www.advancedtubular.com/vtube-step/vtube_v2.9.18_minimum_diameter_warning.mp4 MP4]
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
		+	<br><br>
−	====Video 38: Measuring Demo Part 3 with the HD Scanner on a Table Surface====	+
−	<table width=600>	+	====Video 96: VTube-STEP and VTube-LASER New Radius Features ====
		+
		+
		+	<table width=700>
	<tr>		<tr>
−	<td width=200>	+	<td width=300>
−	This is a quick video showing how to measure demo tube 3 on a table surface with the HD scanner.<br><br>	+	See the new radius features in this video. In Part Setup:
−	There is no narration in this video.	+	* Renamed "Radius 1" (renamed from Default Radius)
−	<br><br>	+	* New "Radius 2" field
		+	* New "Radius 3" field
		+	<br>
		+	In Parametric Tube grid windows:<br>
		+	* See how to quickly set the radii for all bends using the synchronize radius feature.
		+
	</td>		</td>
	<td width=200>		<td width=200>
−	[[image:vtube-laser-2.1_demo_tube_3_HDscan_cutplane_video.png|200px]]	+	[[image:vtube_v2.9.18.video_newradius_features.png|300px]]<br>
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	* View [http://www.advancedtubular.com/vtube-laser/vtube-laser_2.1_scanning_demo_tube_3_with_hdscanner_cutplane.mp4 MP4]	+	* View [https://vimeo.com/317137310 Vimeo]
		+	* View [https://youtu.be/DN_bhnMWCPI YouTube]
		+	* View [https://www.advancedtubular.com/vtube-laser/vtube_v2.9.18_new_syncradlevels.mp4 MP4]
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
		+	<br><br>
−	====Video 37: Measuring Demo Part 3 with the HD Scanner in a Tube Clamp====	+	====Video 95: VTube-LASER Communicating with BendPro G2 on an RbSA Industrial BOOST Trainer ====
−	<table width=600>	+
		+	Michael Cone simulates a corrections loop between VTube-LASER v2.9.18 and BendPro G2 on an RbSA Industrial BOOST trainer.
		+
		+	<table width=700>
	<tr>		<tr>
−	<td width=200>	+	<td width=300>
−	This is a quick video showing how to measure demo tube 3 in a tube clamp with the HD scanner.<br><br>	+
−	There is no narration in this video.	+
−	<br><br>	+
	</td>		</td>
	<td width=200>		<td width=200>
−	[[image:vtube-laser-2.1_demo_tube_3_HDscan_video.png|200px]]	+	[[image:vtl_v2.9.18.video_RbSABendPro_demo.png|300px]]<br>
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	* View [http://www.advancedtubular.com/vtube-laser/vtube-laser_2.1_scanning_demo_tube_3_with_hdscanner.mp4 MP4]	+	* View [https://vimeo.com/315983373 Vimeo]
		+	* View [https://youtu.be/RLCXQt34Alw YouTube]
		+	* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.18_bendpro_communications.mp4 MP4]
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
		+	<br><br>
−	===Version 1.96===	+	===Version 2.9.17===
		+	====Video 94: Five Major Enhancements to VTube-LASER Version 2.9.17 - FEATURING the HEXAGON ABSOLUTE ARM ====
−	====Video 35: The Difference Between End Length Adjustment and End Measured Offsets====	+	Michael Cone shows 5 major new features in VTube-LASER v2.9.17. (Released on December 30,  2018).
−	<table width=600>	+
		+	<table width=700>
	<tr>		<tr>
−	<td width=200>	+	<td width=300>
−	This is a tutorial by the developer of VTube-LASER, Michael Cone.  Michael explains the difference between the END LENGTH ADJUSTMENT values and the END MEASURED OFFSET values in the Part Setup menus.<br><br>	+
	</td>		</td>
	<td width=200>		<td width=200>
−	[[image:vtl-1.96-endlengthadjust_endmeasuredoffset_video.png|200px]]<br>	+	[[image:vtl_v2.9.17.video_newfeatures_hexagon_demo.png|300px]]<br>
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	* View [http://youtu.be/B3QnZHbJH6c YouTube]	+	* View [https://vimeo.com/309191006 Vimeo]
−	* View [http://www.advancedtubular.com/vtube-laser/vtube-laser_1.96_end_adjusts_offsets.mp4 MP4]	+	* View [https://youtu.be/kRwrjV9AqZA YouTube]
		+	* View [https://www.advancedtubular.com/vtube-laser/vtl_v2.9.17_hexagon_major_new_features.mp4 MP4]
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
		+	<br><br>
−	====Video 34: Using Tube Data Storage Menu to Access Historical Data====	+	===Version 2.9.16===
−	<table width=600>	+
		+	====Video 90: How to Attach and Use the ROMER Absolute 8-series Scanner in VTube-LASER ====
		+
		+	This is a video where Michael Cone shows how to attach and use the 8-series style arm scanner with VTube-LASER.
		+	<table width=700>
	<tr>		<tr>
−	<td width=200>	+	<td width=300>
−	This is a tutorial by the developer of VTube-LASER, Michael Cone.  Michael will show you how use Tube Data Storage to permanently store historical data about every measure made by VTube-LASER.<br><br>	+
	</td>		</td>
	<td width=200>		<td width=200>
−	[[image:vtl-1.96-tubedatastorage_video.png|200px]]<br>	+	[[image:vtl_v2.9.16._attach_and_use_RA8_scanner.png|300px]]<br>
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	* View [http://youtu.be/bw2k5RSrCHQ YouTube]	+	* View [https://vimeo.com/298226309 Vimeo]
−	* View [http://www.advancedtubular.com/vtube-laser/vtube-laser-1.96-tube_data_storage_demo.mp4 MP4]	+	* View [https://youtu.be/GQnAAGLJ-Sc YouTube]
		+	* View [https://www.advancedtubular.com/vtube-laser/vtl_2.9.16_ROMER8_HowToAttachAndUseScanner.mp4 MP4]
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
		+	<br><br>
−	===Version 1.94===	+	===Version 2.9.10===
−	====Video 33: Reverse Engineering a Tube Using the Ball Probe====	+	====Video 86: VTube-LASER's LASER SCAN FILTER SOUND ====
−	<table width=600>	+
		+	This is a short video that shows how the Laser Scan Filter sound helps you know when all laser scan data is removed by the scan filters.
		+	<table width=700>
	<tr>		<tr>
−	<td width=200>	+	<td width=300>
−	This is a tutorial by the developer of VTube-LASER, Michael Cone.  Michael will show you how you can reverse engineer a tube with a FARO Edge arm and the ball probe.<br><br>	+
	</td>		</td>
	<td width=200>		<td width=200>
−	[[image:vtube-laser-1.94-reverse_engineer_tactile_video.png.png|200px]]<br>	+	[[image:vtl_v2.9.10._laserscanfilter_sound.png|300px]]<br>
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	* View [http://youtu.be/j1TI6fywuJs YouTube]	+	* View [https://vimeo.com/278343562 Vimeo]
−	* View [http://www.advancedtubular.com/vtube-laser/vtube-laser-1.94-reverse-engineering_tactile.mp4 MP4]	+	* View [https://youtu.be/lAmLVzMHatw YouTube]
		+	* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.10_romer_laserscanfilter_sound.mp4 MP4]
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
		+	<br><br>
−	====Video 32: The Benefits if Wide Diameter Scanning====	+	====Video 84: Measuring Convoluted Tube and Wire with VTube-LASER ====
−	<table width=600>	+
		+	This video shows VTube-LASER's ability to measure extremely convoluted parts with a ROMER Absolute Arm with Integrated Scanner. This wire part wraps back on itself in several places, making it very challenging. Because VTube-LASER has scanning filters, it can measure this part with a wider laser stripe.
		+	<table width=700>
	<tr>		<tr>
−	<td width=200>	+	<td width=300>
−	This is a tutorial by the developer of VTube-LASER, Michael Cone.  Michael will show you why wide diameter scanning is superior to other forms of scanning tubes.<br><br>	+
	</td>		</td>
	<td width=200>		<td width=200>
−	[[image:vtube-1.94_widediameterscanning_video.png|200px]]<br>	+	[[image:vtl_2.9.10_convoluted_tube_and_wire_video.png|300px]]<br>
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	* View [http://youtu.be/vfJcFsOYRIg YouTube]	+	* View on [https://vimeo.com/277725088 Vimeo]
−	* View [http://www.advancedtubular.com/vtube-laser/vtube-laser-1.94-wide_diameter_scan_002.mp4 MP4]	+	* View on [https://youtu.be/ZkZm3bFHzog YouTube]
		+	* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.10_convoluted_tube_wire_demo.mp4 MP4]
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
		+	<br>
−	====Video 31: How to Reverse-Engineer a Tube====	+	===Version 2.9.4===
−	<table width=600>	+
		+	====Video 78: VTube-LASER Corrects an SMT Bender Using a ROMER Absolute Arm ====
		+
		+	This video demonstrates the correction process between VTube-LASER and an SMT remanufactured VB300 bender. We use a ROMER Absolute Arm with integrated scanner in this video.
		+
		+	<table width=700>
	<tr>		<tr>
−	<td width=200>	+	<td width=300>
−	This video shows how to reverse engineer a tube in VTube-LASER 1.94.<br><br>	+
−	The tube used is demo tube number 3.  (Filename: "VTube-Laser Demo 3.vtp")	+
	</td>		</td>
	<td width=200>		<td width=200>
−	[[image:vtube-1.94_reverse_engineering_video.png|200px]]<br>	+	[[image:vtube-laser_v2.9.4_smtcorrection_video.png|300px]]<br>
	</td>		</td>
−	<td width=200>	+	<td width=300>
−	* View [http://youtu.be/VF-idRvgbys YouTube]	+	* View on [https://vimeo.com/256176430 Vimeo]
−	* View [http://www.advancedtubular.com/vtube-laser/vtube-laser-1.94-reverse-engineering.mp4 MP4]	+	* View on [https://youtu.be/Me3l7Ob45tQ YouTube]
		+	* View [https://www.advancedtubular.com/vtube-laser/vtl%20smtvideo.mp4 MP4]
	</td>		</td>
	</tr>		</tr>
		+
	</table>		</table>
		+	<br>
−	====Video 30: Springback Compensation Tutorial====	+	===Version 2===
−	<table width=600>	+
		+	====Video 2: SCANNING SPEED TEST ON TWO TYPES OF TUBES ====
		+
		+	<table width=600>
	<tr>		<tr>
		+	<td width=300>
		+	This video shows speed tests on two very different kinds of tube shapes:<br><br>
		+
		+	# An Exhaust Pipe<br><br>
		+	# A copper HVAC tube with two 180-degree bends</td>
	<td width=200>		<td width=200>
−	This video shows how calculate the anticipated bend angle springback and then compensate the bend setup to make the first part shape close to the nominal shape.	+	[[image:vtube-laser_v2.9.2_romer_speed_test_video.png|300px]]<br>
	</td>		</td>
	<td width=200>		<td width=200>
−	[[image:vtube-1.94_springback_compensation_video.png|200px]]<br>	+	* View on [https://vimeo.com/245475657 Vimeo]
		+	* View [https://www.advancedtubular.com/vtube-laser/vtube-laser_v2.9.2_romer_speed_tests.mp4 MP4]
	</td>		</td>
		+	</tr>
		+	</table>
		+	<br>
		+
		+	====Video 1: INTRODUCING VTUBE-LASER MEASURING WITH A ROMER ABSOLUTE ARM ====
		+
		+	<table width=600>
		+	<tr>
		+	<td width=300>
		+	As of November 1, 2017, VTube-LASER can measure tubes with ROMER Absolute Arms from HEXAGON. This video shows a measurement of a tube using a 3.5 meter ROMER arm.</td>
	<td width=200>		<td width=200>
−	* View [http://youtu.be/7rA83p4pvqE YouTube]	+	[[image:vtube-laser_v2.9_First_ROMER_video.png|300px]]<br>
−	* View [http://www.advancedtubular.com/vtube-step/vtube-1.94_springback_compensation.mp4 MP4]	+	</td>
		+	<td width=200>
		+	* View on [https://vimeo.com/241096894 Vimeo]
		+	* View [https://www.advancedtubular.com/vtube-laser/20171102_VTube-LASER_HEXAGON_ROMER_Scanning.mp4 MP4]
	</td>		</td>
	</tr>		</tr>
	</table>		</table>
−		+	<br>
−	<br><br>	+
	===Other Pages===		===Other Pages===
−	* See [[Retired VTube-LASER Videos]]
	* Back to [[VTube-LASER]]		* Back to [[VTube-LASER]]

---

Latest revision as of 20:16, 24 February 2023

See a list of VTube-LASER videos for ROMER Absolute Arms from HEXAGON on this page. Back to VTube-LASER Knowledgebase Page Back to the VTube-LASER Videos Page

Version 4

Video 20230224: Proper End Straight Scanning Ensures Correct End Point Locations

Michael Cone, the lead developer for VTube-LASER shows how to get reliable end point locations from proper end straight scanning techniques.

View video MP4 View video Vimeo View video YouTube

Video 20230206: How to learn, test, and use the DCP (Diameter Cut Plane) to measure tube straights that are near other objects

This video shows how to learn, test, and use the DCP feature to measure tubes that run near other objects.

View video MP4 View video Vimeo View video YouTube

Video 20220908: Sneak Peek Preview - Shallow Bend Logic in Version 4

This video shows a sneak peek of the new Shallow Bend logic coming in version 4 of VTube-LASER which increases bend point location placement by up to 10 times.

View Video MP4 View Video Vimeo View Video YouTube

Version 3.2

Video 20220629: How Set Up to Correct SMI Benders with VTube-LASER

This video shows set up VTube-LASER to correct SMI benders.

View MP4

Video 20220513: How To Measure Square Tube with VTube-LASER and the HEXAGON Scan Arm

This video shows how to import square models, then measure, correct tube benders, and qualify square tube shapes using a HEXAGON scan arm and VTube-LASER.

View MP4

Video 20220421: How To Set Up and Test VTube-LASER to CNC Bender ProControl Communications

This video shows how to set up and test communications with the SMT CNC Bender ProControl benders.

View MP4

Video 20220331: Improved Best Fit For Shallow Bends

This video shows how this version of VTube-LASER has an improved Best Fit algorithm designed to handle tubes with shallow bends.

View MP4 View Vimeo

Version 3.1

Video 20220113: How to Calculate VTube-LASER Tube Elongation Percentage

This video shows how to calculate tube elongation percentage with VTube-LASER.

View MP4 View Vimeo View YouTube

Video 20211207: VTube-LASER Correction for Han Jie Benders

This video shows how easy it is to auto-correct an SMT Han Jie CNC bender (Version 3.1 build 638)

View MP4 View Vimeo View YouTube

Version 3.0

Video 20210702: How To Enter Tangent Points to Define the Centerline in VTube

Michael Cone explains how the new Tangent Point Entry Grid feature allows operators to enter tangent-point-based centerline data in VTube-STEP and VTube-LASER.(Version 3 build 555, July 2, 2021)

View MP4 View Vimeo View YouTube

Video 20210622: Get Great End Scans Using Flier Filters in VTube-LASER

Michael Cone explains the End Scan Flier Filter feature that automatically removes fliers from end scans. (Version 3 build 542, June 22, 2021)

View MP4 View Vimeo View YouTube

Video 20210505: How To Determine Positive and Negative Rotation Directions

Michael Cone explains how to determine if the rotation direction on your CNC bender matches the rotation direction in VTube.

View MP4 View Vimeo View YouTube

Video 20210503: Automatic Reverse Calc

Michael Cone explains the new Automatic Reverse Calc in VTube version 3 build 513.

View MP4 View Vimeo View YouTube

Video 20210421: Why and How to Use MTA (Measured Tube Averaging)

Michael Cone shows the why and how of MTA.

View MP4 View Vimeo View YouTube

Video 202100413: VTube v3 NPS Values Tutorial

Michael Cone shows how to use the new NPS values in VTube.

View MP4 View Vimeo View YouTube

Video 202100406: VTube-LASER Reverse Engineering Tutorial

Michael Cone shows how easy it is to reverse engineer a tube shape with VTube-LASER.

View MP4 View Vimeo View YouTube

Video 20210330: VTube-LASER to Transfluid Bender Communications

This video shows how easy it is to communicate with Transfluid tProject bender software.

View MP4 View Vimeo

Video 20210313: How to Enter Bender Data of Different Types in the Same Project

This video shows how to enter bender data of mixed data types and then reverse calc to centerline XYZ data.

View MP4 View Vimeo

Video 20210310: How to Import New Report Templates

This video shows how to import new report templates into VTube-STEP and VTube-LASER.

View MP4 View Vimeo

Video 20201221: VTube-LASER Five-minute Bender Correction for UTE Select (HEXAGON)

See how to correct a tube shape in a UTE SELECT bender in less than 5 minutes.

View MP4 View Vimeo

Video 20201111B: Automatic Copy of the Default Tolerance to Tube Straights

Learn how automatically copy the edited default tangent/midpoint tolerance to all the tube straights.

View MP4 View Vimeo

Video 20201111: How to Use Precision Weight Control Alignment to Simulate Zero-Tolerance Gauges

Learn how to use Precision Weight Control Alignment in VTube-LASER to better simulate zero-tolerance gauges.

View MP4 View Vimeo

Video 20200930: How to Measure and Qualify OD End Profiles Using Assembly (HEXAGON)

This video shows how to use Assembly to measure and qualify OD end profiles using a HEXAGON arm.

View MP4 View Vimeo

Video 20200924: How to Measure and Qualify Ports on a Tube Using Assembly (HEXAGON)

This video shows how to use Assembly to measure and qualify ports attached to a tube using VTube-LASER. The same principle can be extended to holes in tube shapes.

View MP4 View Vimeo

Video 20200722: Scanning Tube with a Legacy ROMER Scan Arm

This video shows VTube-LASER using an older RS-7520-SI arm with a version 1 scanner.

Download Vimeo View MP4

Video 20200709: Real-time Overall Scan Scores Build Confidence

This video shows how VTube-LASER scan scoring system helps users know they are measuring well.

View MP4

Video 20200609: How to Use Multiple Versions of the Same Part in One Project

This video shows how to use Assembly to create multiple versions of the same part in one project. Each version can then be used to measure the part at various stages of the fabrication process.

View MP4

Video 20200515: How Import 180-degree Bend Models

This video shows how to import models with 180-degree bends.

View MP4

Video 20200514: How to Change Languages in VTube

This video shows how to change languages in the VTube-LASER and VTube-STEP user interface.

View MP4

Video 20200331: VTube UNIVERSITY Training Video: Verify a HEXAGON Arm with a Precision Cylinder Bar

This is a VTube University video that shows how to quickly verify a HEXAGON ScanArm with VTube-LASER and a precision cylinder bar.

View Vimeo Download Vimeo View MP4

Video 20200320: VTube UNIVERSITY Training Video: End Scans

This video is a VTube University video designed to show how to effectively end scan a tube using VTube-LASER.

View Vimeo View YouTube View MP4

Video 20200309: Corrections with the OMCG Wire Bender

This video shows a corrections loop between VTube-LASER and an OMCG wire bender.

View YouTube View Vimeo View MP4

Video 20200225: How to manually setup the Ethernet port for HEXAGON RDS connection

You can manually setup the Ethernet port following the steps in this short video.

View MP4

Video 20200206: How to Switch from Probe to LASER with HEXAGON RA8 Arms

Switching from probe to laser is easy with the three-way toggle button. (Using a HEXAGON RA8 ScanArm)

View Vimeo View MP4

Version 2.9.21

Video 20200114: How to Use VTube-LASER Corner Profile Measure Process for Different Tube Profiles

See how to use VTube-LASER Corner Profile measurement for PROFILE, SQUARE, RECTANGULAR, and EXTRUDED shapes - with either the LASER or the BALL PROBE. (Using a HEXAGON 8325 ScanArm)

View Vimeo View MP4

Video 107: Corrections Loop with SOCO Beckhoff Controls

This demo video shows how VTube-LASER performs corrections loop communications with SOCO Beckhoff controls.

View Vimeo View MP4

Version 2.9.19

Video 104: Demo of VTube-LASER Measuring from 2mm to 450mm Tube and Pipe + Square

This demo video shows the wide range of tube, pipe, wire, string types that VTube-LASER can scan with a laser scanner arm.

View Vimeo View MP4

Video 103: VTube-LASER "Timer Accept" Feature Cuts Button Press Counts in Half

This video shows how the TIMER ACCEPT button can decrease your button presses during UniScan tube measuring by half.

View Vimeo View MP4

Version 2.9.18

Video 100: How To Calculate the Centerline Radius in a Measured 180-degree Bend

This video shows how to use the Dimension Control window to calculate the true radius of a 180-degree bend.

View MP4

Video 99: See VTube-LASER Reverse Engineer a RZR Side by Side Custom Tube Assembly using a HEXAGON RA8 Arm

This video shows Michael Cone using VTube-LASER to reverse engineer a custom 8 tube assembly for a RZR Side by Side in 8 minutes - including sending the part to SOLIDWORKS.

View Vimeo View YouTube View MP4

Video 98: About the Small Diameter Warning

This video shows how Small Diameter Warning works along with its setup.

View Vimeo View YouTube View MP4

Video 96: VTube-STEP and VTube-LASER New Radius Features

See the new radius features in this video. In Part Setup: Renamed "Radius 1" (renamed from Default Radius) New "Radius 2" field New "Radius 3" field In Parametric Tube grid windows: See how to quickly set the radii for all bends using the synchronize radius feature.

View Vimeo View YouTube View MP4

Video 95: VTube-LASER Communicating with BendPro G2 on an RbSA Industrial BOOST Trainer

Michael Cone simulates a corrections loop between VTube-LASER v2.9.18 and BendPro G2 on an RbSA Industrial BOOST trainer.

View Vimeo View YouTube View MP4

Version 2.9.17

Video 94: Five Major Enhancements to VTube-LASER Version 2.9.17 - FEATURING the HEXAGON ABSOLUTE ARM

Michael Cone shows 5 major new features in VTube-LASER v2.9.17. (Released on December 30, 2018).

View Vimeo View YouTube View MP4

Version 2.9.16

Video 90: How to Attach and Use the ROMER Absolute 8-series Scanner in VTube-LASER

This is a video where Michael Cone shows how to attach and use the 8-series style arm scanner with VTube-LASER.

View Vimeo View YouTube View MP4

Version 2.9.10

Video 86: VTube-LASER's LASER SCAN FILTER SOUND

This is a short video that shows how the Laser Scan Filter sound helps you know when all laser scan data is removed by the scan filters.

View Vimeo View YouTube View MP4

Video 84: Measuring Convoluted Tube and Wire with VTube-LASER

This video shows VTube-LASER's ability to measure extremely convoluted parts with a ROMER Absolute Arm with Integrated Scanner. This wire part wraps back on itself in several places, making it very challenging. Because VTube-LASER has scanning filters, it can measure this part with a wider laser stripe.

View on Vimeo View on YouTube View MP4

Version 2.9.4

Video 78: VTube-LASER Corrects an SMT Bender Using a ROMER Absolute Arm

This video demonstrates the correction process between VTube-LASER and an SMT remanufactured VB300 bender. We use a ROMER Absolute Arm with integrated scanner in this video.

View on Vimeo View on YouTube View MP4

Version 2

Video 2: SCANNING SPEED TEST ON TWO TYPES OF TUBES

This video shows speed tests on two very different kinds of tube shapes: An Exhaust Pipe A copper HVAC tube with two 180-degree bends

View on Vimeo View MP4

Video 1: INTRODUCING VTUBE-LASER MEASURING WITH A ROMER ABSOLUTE ARM

As of November 1, 2017, VTube-LASER can measure tubes with ROMER Absolute Arms from HEXAGON. This video shows a measurement of a tube using a 3.5 meter ROMER arm.

View on Vimeo View MP4

Other Pages

• Back to VTube-LASER