Difference between revisions of "VTube-LASER Videos"

From ATTWiki
Jump to: navigation, search
(Video Topic: Measuring with a Ball Probe)
(Version 1.82 - June 19, 2013)
Line 21: Line 21:
  
  
 +
 +
===Version 1.83 - July 29, 2013===
 +
 +
====Video Topic: Entering Tube Print Data To Establish the Master Data====
 +
<table width=600>
 +
 +
<tr>
 +
<td width=200>
 +
This video shows how to enter data from a tube print in order to establish the master part data in VTube-LASER v1.83</td>
 +
<td width=200>
 +
[[image:vtube-1.82-youtubemeasureballprobe.jpg|200px]]<br>
 +
</td>
 +
<td width=200>
 +
* View[http://youtu.be/TeBjVWAqV5c YouTube]
 +
* View [http://www.advancedtubular.com/vtube-laser/vtube-laser-1.83-tutorial_001.mp4 MP4]
 +
</td>
 +
</tr>
 +
</table>
  
 
===Version 1.82 - June 19, 2013===
 
===Version 1.82 - June 19, 2013===

Revision as of 20:53, 1 August 2013

Vtube-laser logo.jpg See a complete list of VTube-LASER videos on this page.

Vtube-laser 1 73.jpg

Contents


Vtube-laser video 6inch tube.jpg



Version 1.83 - July 29, 2013

Video Topic: Entering Tube Print Data To Establish the Master Data

This video shows how to enter data from a tube print in order to establish the master part data in VTube-LASER v1.83

Vtube-1.82-youtubemeasureballprobe.jpg

Version 1.82 - June 19, 2013

Video Topic: Measuring with a Ball Probe

This video shows how to measure a tube with a ball probe in VTube-LASER Version 1.82

Vtube-1.82-youtubemeasureballprobe.jpg

Version 1.81.5 - April 5, 2013

Video Topic: Point Count and Straight Count

This short video shows the correspondence between centerline point count and straight count. It helps explain where the straight count comes from when you press the "Set to MASTER Count" button.

Vtube-pointcount-straightcount.jpg

Version 1.81.4 - March 28, 2013

Video Topic: How to Change Languages

This short video shows how to change the language in the VTube user interface.

Vtube-how-to-change-languages.jpg

Video Topic: How to Use the Language Editor

How to edit any language for the VTube user interface using the VTube Language Editor or Microsoft Excel.

Vtube-languageeditor videotutorial.jpg

Version 1.81.3 - February 22, 2013

Video Topic: The New Floating DRO (Digital Readout)

This video shows a short closeup of the new floating DRO window in VTube-LASER.

Vtube-laser dro with captionbox.jpg

Version 1.81.1 - February 5, 2013

Video Topic: How to Use Hard Point 321 PLP (Plane-Line-Point)

This video shows how to use the 321 PLP method to align a part. It describes reasons to switch to this method of alignment in unusual circumstances.

VTube 1.81.1 321PLP Tutorial.jpg

Version 1.80.1 - December 14, 2012

Video Topic: Repeatability Test for Surface-Coated Aluminum

This demonstrates a quick repeatability test of a surface-coated aluminum tube.

Note: This video has no narration.

VTube-STEP 1.80.1 repeatability surfacecoat alum.jpg

Video Topic: Effective End Scans

This demonstrates the different end scan techniques for measuring tube.

We discuss the strengths and weaknesses of the various techniques.

VTube-STEP 1.80.1 endscan.jpg

Version 1.80 - December 8, 2012

Video Topic: Effective highly reflective aluminum scanning

This is a proof-of-concept video for a 1/2" highly reflective aluminum tube. The goal is to demonstrate repeatability better than 300 microns.

The result was a range from 80 to 180 microns (0.003 to 0.007") maximum deviation.

This video also shows the best way to scan a highly reflective tube end - and how to be sure the scan is good.

VTube-STEP 1.80 demoscan almuminum.jpg

Version 1.80 - November 23, 2012

How to extract a tube centerline of demo part 2 with VTube-STEP version 1.80. Note that this part has a 180 degree bend - which requires special steps for import anc calculation.

VTube-STEP 1.80 ImportingSolidModels.jpg

Version 1.76.4 - May 15, 2012

How to measure a straight tube.

How to use Measured tube data to create Master tube data.

Version 1.76.3 - April 2, 2012

How to setup the Scanner Control to measuring tubes with the laser probe.

Version 1.76 - March 15, 2012

Unbending a tube with coping at either end.
(Pro and LASER License Level)

Version 1.75 - February 2012








Older Versions



Other Pages