VTube-LASER ROMER RDS Performance Recommendations

From ATTWiki
Revision as of 16:08, 18 July 2018 by Mcone (Talk | contribs)

Jump to: navigation, search

Information about RDS performance with VTube-LASER



ROMER Scanner Plus Hex Logo.png


See also RDS Versions for ROMER Scanners


About ROMER RDS

ROMER RDS is a driver system that connects software like VTube-LASER to any ROMER arm that uses the RDS driver. See this page for details all the different arms that RDS can connect VTube-LASER to:

RDS Performance Notes

When idling, the RDS service requires only 1 to 5 percent of the CPU usage.

When scanning, RDS can take up to 20% of the CPU usage.

It is very important that other processes are not causing the CPU usage to rise to 100%. If you have other services that send the CPU over 50%, you may experience less than ideal scanning responses.

RDS Popup Menu.png

You can watch the CPU usage in the Windows Task Manager.

In Windows 10, to display the Task Manager, right click on the task bar at the bottom of the Windows desktop and choose "Task Manager" from the popup menu.

RDS in Task Manager.png




RDS Control Panel Setup

This is how we recommend that you setup the RSx menu in the RDS Control Panel.

  • Capture mode: Keep button pressed
  • Sound guide: Unchecked (OFF)
  • Point Sampling: 25% (or the lowest available)
  • Behavior when press the left and right buttons: Switch exposure mode
  • Exposure mode: Automatic

To change any of these settings, you will need to change users from Standard mode to Advanced mode. Click on the Standard user button on the upper right corner, then change to Advanced mode by entering the password. The default password is "Advanced".

If you want to, you can save a custom profile (setup) as something like "VTube-LASER".

RDS Control Panel - RSx Menu.png

RDS Control Panel - RSx Menu - Advanced User.png



ROMER Ball Probe Support

All ball probe systems on devices that run through RDS are compatible with VTube-LASER. (VTube-LASER can use the LASER or the ball probe.)

VTube-LASER works well with systems that only have ball probes. A few of our customers prefer to use only ball probes.




ROMER Versions

RDS 4.2.1 and 4.2.2 work well. v4.2.2 and newer has anti-outlier (anti-flyer) algorithms for highly reflective surfaces.



How to Determine Your Current RDS Version

Left click on the System Tray icon.

Left click system tray icon.png

Right click on the measuring center icon.

Right click on the measuring center icon.png

Left click on About.

RDS left click on about.png

The RDS About window will display.

RDS4.3.2 About Dialog.png



Other Pages