Difference between revisions of "Use Bend Count For Machine Lube"
From ATTWiki
| Line 13: | Line 13: | ||
<pre>Use Bend Count For Machine Lube= 1</pre> | <pre>Use Bend Count For Machine Lube= 1</pre> | ||
| − | If the value is set to 1, then it is activated, and [[Lube Machine At Bend Count]] property will be used to set the event for the machine lube. | + | If the value is set to 1, then it is activated, and [[Lube Machine At Bend Count]] property will be used to set the event for the machine lube.<br> |
| + | <br> | ||
| + | If the value is set to 0, then it is deactivated, and [[Lube Machine At Part Count]] property will be used to set the event for the machine lube.<br> | ||
--[[User:Mcone|Mcone]] 23:40, 19 July 2006 (EDT) | --[[User:Mcone|Mcone]] 23:40, 19 July 2006 (EDT) | ||
Revision as of 03:47, 20 July 2006
Contents |
What is It?
This property is a switch that instructs CNC Processor to use the bend count rather than the part count for machine lube start event.
Value
The value is set to 0 or 1 like this:
Use Bend Count For Machine Lube= 0
or
Use Bend Count For Machine Lube= 1
If the value is set to 1, then it is activated, and Lube Machine At Bend Count property will be used to set the event for the machine lube.
If the value is set to 0, then it is deactivated, and Lube Machine At Part Count property will be used to set the event for the machine lube.
--Mcone 23:40, 19 July 2006 (EDT)
