TubeCAD Pro v8-20141217

From ATTWiki
Revision as of 21:36, 17 December 2014 by Mcone (Talk | contribs)

Jump to: navigation, search

Tcadpro logo.jpg

Version 8-20141217

Back to TubeCAD Pro

Tcadpro demo generated.jpg




Check.jpg FIX- Diameter Outline - Hidden Line Fixes for AutoCAD

Tcadpro v8-20141217 dxf hiddenlines fix002.png

Previous versions of TubeCAD could sometimes draw the hidden lines in the diameter outline on the wrong side of the diameter.

This has been repaired.

Tcadpro v8-20141217 dxf hiddenlines fix.png


Check.jpg FIX- 3D Circle Orientation Fix

This version repairs a 3D circle orientation problem for certain tube diameters.

All 3D circles are now drawn precisely regardless of their orientation.

Tcadpro v8-20141217 circle plane fix.png

Check.jpg FIX- End To Base Distance Calculations

Tcadpro v8-20141217 blockup error.png

The End to Base Blockup label now shows the correct distances.

Tcadpro v8-20141217 blockup fixed.png

Check.jpg FIX- Artifact Cleanup

When changing from a multiple-bend part to a single straight part, TubeCAD would not always cleanup leftover artifacts that no longer apply.

This has been resolved.

Tcadpro v8-20141217 artifact cleanup issue resolved.png

Check.jpg ENHANCEMENTS and FIXES- Blockup Editor

  • Because each tube view can have its own unique Blockup settings, the Blockup editor screen values now automatically change the data when you switch active assembly or active view at the top of the window.

  • The Base Offset for Blockups can now be set in Blockup Editor and stored in the Prototype files.

  • The Individual Blockup Attributes panel is invisible when there are no Blockups on the current view to change.

Tcadpro v8-20141217 base offset setup.png

Tcadpro v8-20141217 blockup editor individual blockup attributes.png

Check.jpg ENHANCEMENT - Better Auto Arrange with Assemblies

  • Auto Arrange can now properly handle arrangements of assemblies with parts that have less than one bend.
  • Auto Arrange automatic spacing was also enhanced for assemblies.

Tcadpro v8-20141217 assembly autoarrange.png

Check.jpg OTHER

  • TubeCAD now stores all configuration data in the c:\ProgramData\tcadpro folder to allow TubeCAD to be setup once for use by users who login into Windows with unique credentials.

  • TubeCAD can now output debug data to Smart Inspect logs and display consoles. This is mainly for testing purposes.


Other Pages