TubeCAD Pro v8-20141217

From ATTWiki
Revision as of 20:04, 17 December 2014 by Mcone (Talk | contribs)

Jump to: navigation, search

Tcadpro logo.jpg

Version 8-20141217

Back to TubeCAD Pro

Tcadpro demo generated.jpg




Check.jpg REPAIRED - TubeCAD Diameter Outline - Hidden Line Fixes for AutoCAD

Tcadpro v8-20141217 dxf hiddenlines fix002.png

Previous versions of TubeCAD could sometimes draw the hidden lines in the diameter outline on the wrong side of the diameter.

This has been repaired.

Tcadpro v8-20141217 dxf hiddenlines fix.png


Check.jpg FIX- TubeCAD Circle Plane Fix

This version repairs a circle plane calculation problem for certain tube orientations.

All 3D circles are now drawn precisely regardless of their orientation.

Tcadpro v8-20141217 circle plane fix.png

Check.jpg FIX- End To Base Distance Calculations

Tcadpro v8-20141217 blockup error.png

The End to Base Blockup label now shows the correct distances.

Tcadpro v8-20141217 blockup fixed.png

Check.jpg FIX- Artifact Cleanup=

When changing from a multiple-bend part to a single straight part, TubeCAD would not always cleanup leftover artifacts that no longer apply.

This has been resolved.

Tcadpro v8-20141217 artifact cleanup issue resolved.png

Check.jpg FIX- Blockup Label Base Offset In Prototype File

The Base Offset for Blockups can now be set in Blockup Editor and stored in the Prototype files.

Tcadpro v8-20141217 base offset setup.png

Check.jpg OTHER

  • TubeCAD now stores all configuration data in the c:\ProgramData\tcadpro folder to allow TubeCAD to be setup once for use by users who login into Windows with unique credentials.
  • TubeCAD can now output debug data to Smart Inspect logs and display consoles.


Other Pages