TubeCAD Pro v8-20141217

From ATTWiki
Revision as of 19:58, 17 December 2014 by Mcone (Talk | contribs)

Jump to: navigation, search

Tcadpro logo.jpg

Version 8-20141217

Back to TubeCAD Pro

Tcadpro demo generated.jpg




Check.jpg REPAIRED - TubeCAD Diameter Outline - Hidden Line Fixes for AutoCAD

Tcadpro v8-20141217 dxf hiddenlines fix002.png

Previous versions of TubeCAD could sometimes draw the hidden lines in the diameter outline on the wrong side of the diameter.

This has been repaired.

Tcadpro v8-20141217 dxf hiddenlines fix.png


Check.jpg FIX- TubeCAD Circle Plane Fix

This version repairs a circle plane calculation problem for certain tube orientations.

All 3D circles are now drawn precisely regardless of their orientation.

Tcadpro v8-20141217 circle plane fix.png


Check.jpg FIX- End To Base Distance Calculations

Tcadpro v8-20141217 blockup error.png

The End to Base Blockup label now shows the correct distances.

Tcadpro v8-20141217 blockup fixed.png

Check.jpg FIX- Artifact Cleanup

When changing from a multiple-bend part to a single straight part, TubeCAD would not always cleanup leftover artifacts that no longer apply.

This has been resolved.

Tcadpro v8-20141217 artifact cleanup issue resolved.png

Check.jpg FIX- Blockup Label Base Offset In Prototype File

The Base Offset for Blockups can now be set in Blockup Editor and stored in the Prototype files.

Tcadpro v8-20141217 base offset setup.png

Check.jpg OTHER

  • TubeCAD now remembers the DXF path programmed the options menu. This path is used to start the DXF export dialog in the proper location. It is also used to build temporary DXF files for automatic transfer to AutoCAD and Intellicad.

Tcadpro options dxfpath.png


Other Pages