TubeCAD Pro v8-20130206

From ATTWiki
Revision as of 17:56, 6 February 2013 by Mcone (Talk | contribs)

Jump to: navigation, search

Tcadpro logo.jpg



Contents

Check.jpg ENHANCED - Added DXF Path for Build Location

The DXF build location can be adjusted in the Options dialog.

Right click on the viewport, then choose Options to access this menu.

Tubecadpro dxfpath.jpg


Check.jpg ENHANCED - Centerline Labels Offset

The centerline labels are now positioned in better locations so that they don't overlap the diameters.

The algorithm moves the points away from the tube on the outside of the bends if possible.

Tubecadpro centerlinelabeloffset.jpg



Check.jpg FIX - Synchronization Warning Logic Enhanced for Rotations

Negative and positive rotation values that are in the same place in space (like 270 and -90) are no longer treated as synchronization errors that are out of tolerance.

Tubecadpro syncerrors.jpg



Check.jpg FIX - Enter Total Length Box Value

The Enter Total Length Box value in the Absolute Bender Data page in General Specifications was being corrupted when it was changed by the operator. This has been fixed.

Tubecadpro entertotallengthbox.jpg


Other Pages