Set the Number of Values Beyond the Decimal for VTube

From ATTWiki
Revision as of 23:15, 29 October 2012 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-step logo.jpg
Vtube-laser logo.jpg How to set the number of values beyond the decimal.

Vtube-step 1.77.4.jpg



Step 1 - Clear Project

Press the Clear Project button in the toolbar.
Vtube-clearproject.jpg

Step 2 - Enter System Options

Press the System Options button in the toolbar.

Vtube-systemoptions.jpg

Step 3 - Enter System Options

Press the Math Setup tab, then the Decimal tab.

Vtube-mathsetup decimal.jpg

Step 4 - Change the Decimal Setup

Press the Math Setup tab, then the Decimal tab.

Vtube-decimalsetup.jpg

Step 5 - Switch to the Project Setup Tab

Change to the project setup tab and press the Set Project Default button the new default for clearing VTube.

Vtube-projectsetuptab.jpg

Setup Complete

Now, whenever VTube is cleared for a new project, the new decimal places setup will take effect.

Other