Difference between revisions of "Romer"

From ATTWiki
Jump to: navigation, search
Line 2: Line 2:
 
<tr>
 
<tr>
 
<td width=200>
 
<td width=200>
Romer is one of the measuring center companies well-known for its [[Supravision]] software and portable measuring centers.  As of the turn of the century, Romer has begun replacing [[Supravision]] with the newer [[DOCS]] software.
+
ROMER is a measuring center company well-known for its [[Supravision]] software and portable measuring centers.  As of the turn of the century, Romer has begun replacing [[Supravision]] with the newer [[DOCS]] software.
 
</td>
 
</td>
 
<td>
 
<td>

Revision as of 16:00, 23 November 2009

ROMER is a measuring center company well-known for its Supravision software and portable measuring centers. As of the turn of the century, Romer has begun replacing Supravision with the newer DOCS software.

Romer infinite.jpg


PURCHASED by HEXAGON

On August 3, 2007, Hexagon Metrology purchased ROMER-CIMCORE. Hexagon Metrology is owned by Hexagon AB.


Bender Connection

  • Our Benderlink Ethernet Module allows Romers with Supravision or DOCS to connect to any VELOG, EL-2000, or Premier Eaton Leonard bender control.
Diagram romer to premier.jpg


Tube Measuring Probes

ROMER arms use infrared probes to measure tube shapes.

The probe shown here is the 25mm probe (also called the 1 inch probe)

Romer tubeprobe.jpg

See the source page for this image.


Calibration Probes

ROMER arms uses ball probes for calibration of the arm.

The probe shown here is the 15mm steel ball probe for calibration of the arm.

Romer 15mmballprobe.jpg


Calibration Bars

This is commonly called a T-Bar.

It is used to calibrate the tube measuring probes.

Romer tbar.jpg