Revision: Benderlink for Chiyoda/Keins 6.4

From ATTWiki
Revision as of 16:38, 20 February 2013 by Mcone (Talk | contribs)

Jump to: navigation, search

Blink keinschiyoda orangefire.jpg

Revision 6.4

Back to Benderlink for Chiyoda
Back to Benderlink for KEINS

Blink keinschiyoda screens 6.1.jpg



Check.jpg ENHANCED - Installation For All Users

Previous installations required that the installer by logged into Windows as the user account that will use the computer with Benderlink.

This follows the Microsoft suggested method of handling program data for Windows from Vista and newer (Examples: Vista, Windows 7, Windows 8)

See the list at the right for how this works in detail.

  1. The Benderlink installation program installs an initial set of common configuration files for all users. In Vista and Windows 7, these files are stored in c:\ProgramData\BenderlinkChiyodaKeins

  2. When a new user (new Windows login) starts Benderlink, the common setup files are used to establish a unique set of starting configuration files assigned to that user's private c:\users\<username>\AppData\Roaming\BenderlinkChiyodaKeins folder.

  3. The bender and measuring center files are stored in Documents\BenderlinkChiyodaKeins. If these folders and files do not exist when Benderlink starts, then Benderlink will copy common configuration files from the common folder into this folder to give the user a starting set of sample parts.

  4. Benderlink will also automatically assign that Documents location as the default part storage path. (This path can be configured inside Benderlink to other paths.)


Check.jpg NEW - SKIP XYZ Section Transfer for Touchscreen Controls

You can now skip the XYZ section for transfer from communication if you don't need it.

Use the new Options menu called "MQ85 Sections" switch this feature on.

Benderlinkchiyodakeins mq85sections v6.3.jpg

Benderlinkchiyodakeins mq85sectionsMenu v6.3.jpg

OTHER PAGES