Difference between revisions of "Revision: Benderlink for Chiyoda/Keins 6.4"

From ATTWiki
Jump to: navigation, search
(Where Each User's Part Data is Stored)
(User's Initial Bender Part Path Assigned)
Line 47: Line 47:
  
 
==User's Initial Bender Part Path Assigned==
 
==User's Initial Bender Part Path Assigned==
Benderlink will also automatically assign that Documents location as the default part storage path.  (This path can be configured inside Benderlink to other paths.)<br><br>
+
Benderlink will also automatically assign that Documents location as the default part storage path for each bender inside Benderlink.  (This path can be configured inside Benderlink to other paths.)<br><br>
  
  

Revision as of 17:19, 20 February 2013

Blink keinschiyoda orangefire.jpg

Revision 6.4

Back to Benderlink for Chiyoda
Back to Benderlink for KEINS

Blink keinschiyoda screens 6.1.jpg



Check.jpg ENHANCED - Better Handling for Installations With Multiple User Accounts

This version of Benderlink allows for installation on Windows setups that use multiple users with different login names. Benderlink can now properly handle unique configurations for each user by starting with a copy of common starting configuration files.

Previous installations required that the installer be logged into Windows as the user name that will use the computer with Benderlink. When logging on as a different user, Benderlink would lose track of the configuration files.

The method described on the right follows the Microsoft-suggested method of handling program data for multi-user logins for Windows from Vista and newer (Examples: Vista, Windows 7, Windows 8)

How it works:

Starting Common Setup Data

The Benderlink installation program installs an initial set of common configuration files for all users.

Use an administration login to install the initial Benderlink.

In Vista, Windows 7, and Windows 8, these files are stored in c:\ProgramData\BenderlinkChiyodaKeins

What Happens When Benderlink is Used For a New User the First Time

In this multi-user environment, you will eventually log in under other user names to use Benderlink. When Benderlink is run the first time for any user log in, the common configuration files are copied to that user's private folder structure (also called a "namespace").

The folder is assigned like this: c:\users\<username>\AppData\Roaming\BenderlinkChiyodaKeins

Note: The common configuration folders and files are only copied when the same folders and files do not already exist in the user's private folder.

Where Each User's Part Data is Stored

The bender and measuring center files are stored in Documents\BenderlinkChiyodaKeins. If these folders and files do not exist when Benderlink starts, then Benderlink will copy common configuration files from the common folder into this folder to give the user a starting set of sample parts.

Note: The common set of initial user's data are only copied from the common setup folder when the same folders and files do not already exist in the user's private Documents folder.

User's Initial Bender Part Path Assigned

Benderlink will also automatically assign that Documents location as the default part storage path for each bender inside Benderlink. (This path can be configured inside Benderlink to other paths.)


OTHER PAGES