RDS Versions for ROMER Scanners

From ATTWiki
Revision as of 01:32, 28 October 2022 by Mcone (Talk | contribs)

Jump to: navigation, search

Information about RDS (Romer Data Service) Versions and HEXAGON scanner versions



VTube-LASER HEXAGONRDS with AS1 Scanner.png


Contents



HEXAGON Scanner RDS (Romer Data Service) Driver Versions Supported

“RS” refers to “ROMER Scanner”
"RDS" refers to "ROMER Data Service"

The RDS versions are listed from newest to oldest.

  1. RDS 6.2.1 is tested and works well. Download from our support site
  2. RDS 6.2.0 is tested and works well. Download from our support site
  3. RDS 5.3.0 is tested and works well. Download from our support site
  4. RDS 5.2.0 is tested and works well.
  5. RDS 5.0.0 is tested and works well. This version is required for the 8-series of the HEXAGON Absolute Arms.
  6. RDS 4.2.3 is tested and works well.
  7. RDS 4.2.2 is tested and works well.
  8. RDS 4.2.1 is tested and works well.
  9. RDS 4.2.0 or newer should be used for scanner versions RS2, RS3, RS4, and RS5

NOTE: The RS1 scanner requires RDS 4.0 or 4.1 – but not newer.




HEXAGON Scanners Website

Romer Scanners Site

HEXAGON Scanner Support

According to HEXAGON, VTube-LASER can support any scanner supported by RDS directly, including...

This scanner is for the RA8 7-axis arms only. It is very good for parts that are highly reflective or change reflectivity on different parts of the surface. The SHINE technology takes three different exposures of each laser stripe in order to properly take in data from surfaces that have different reflectivity along the stripe.

HEXAGON RS6 Scanner.png

This is for RA8 7-axis Portable Arms. It is best for parts that have consistent surface reflectivity properties along the entire part because the camera chooses a single exposure for each stripe.

HEXAGON RS5 Scanner.png

  • RA7 7-axis Portable Arms with RS4 Scanners

ROMER Scanner Plus Hex Logo.png

  • CMS108 Scanners

ROMER CMSScanner.png

  • HP-L-20.8

  • RA7 and RA8 Portable Arms with HP-L-8.9 scanners

    This scanner is for attachment of a scanner on the same arms that use Tube Shaper software. See the ROMER HP-L-8.9 website

  • For use on 6 axis arms.

ROMER HPLScanner.png

  • Leica Absolute Scanner for Long Distances
  • The LR model can measure a 10 meter volume.
  • The MR model can measure a 20 meter volume.
  • YouTube video of LAS

LeicaLAS.png



ROMER Ball Probe Support

All ball probe systems on devices that run through RDS are compatible with VTube-LASER.




Other Pages