Difference between revisions of "RDS Versions for ROMER Scanners"

From ATTWiki
Jump to: navigation, search
(HEXAGON Scanner Driver Versions Supported)
(HEXAGON Scanner Driver Versions Supported)
Line 28: Line 28:
 
“RS” refers to “ROMER Scanner”<br>
 
“RS” refers to “ROMER Scanner”<br>
 
"RDS" refers to "ROMER Data Service"<br><br>
 
"RDS" refers to "ROMER Data Service"<br><br>
 +
 +
The RDS versions are listed from newest to oldest.
 +
 
# RDS 6.2.1 is tested and works well.  [https://www.advancedtubularsupport.com/hexagon-absolute-arm-drivers.html Download from our support site]
 
# RDS 6.2.1 is tested and works well.  [https://www.advancedtubularsupport.com/hexagon-absolute-arm-drivers.html Download from our support site]
 
# RDS 6.2.0 is tested and works well.  [https://www.advancedtubularsupport.com/hexagon-absolute-arm-drivers.html Download from our support site]
 
# RDS 6.2.0 is tested and works well.  [https://www.advancedtubularsupport.com/hexagon-absolute-arm-drivers.html Download from our support site]
Line 38: Line 41:
 
# RDS 4.2.0 or newer should be used for scanner versions RS2, RS3, RS4, and RS5
 
# RDS 4.2.0 or newer should be used for scanner versions RS2, RS3, RS4, and RS5
  
# The RS1 scanner requires RDS 4.0 or 4.1 – but not newer.
+
NOTE: The RS1 scanner requires RDS 4.0 or 4.1 – but not newer.
  
  

Revision as of 01:30, 28 October 2022

Information about RDS Versions and HEXAGON scanner versions



VTube-LASER HEXAGONRDS with AS1 Scanner.png



HEXAGON Scanner Driver Versions Supported

“RS” refers to “ROMER Scanner”
"RDS" refers to "ROMER Data Service"

The RDS versions are listed from newest to oldest.

  1. RDS 6.2.1 is tested and works well. Download from our support site
  2. RDS 6.2.0 is tested and works well. Download from our support site
  3. RDS 5.3.0 is tested and works well. Download from our support site
  4. RDS 5.2.0 is tested and works well.
  5. RDS 5.0.0 is tested and works well. This version is required for the 8-series of the HEXAGON Absolute Arms.
  6. RDS 4.2.3 is tested and works well.
  7. RDS 4.2.2 is tested and works well.
  8. RDS 4.2.1 is tested and works well.
  9. RDS 4.2.0 or newer should be used for scanner versions RS2, RS3, RS4, and RS5

NOTE: The RS1 scanner requires RDS 4.0 or 4.1 – but not newer.








HEXAGON Scanners Website

Romer Scanners Site

HEXAGON Scanner Support

According to HEXAGON, VTube-LASER can support any scanner supported by RDS directly, including...

This scanner is for the RA8 7-axis arms only. It is very good for parts that are highly reflective or change reflectivity on different parts of the surface. The SHINE technology takes three different exposures of each laser stripe in order to properly take in data from surfaces that have different reflectivity along the stripe.

HEXAGON RS6 Scanner.png

This is for RA8 7-axis Portable Arms. It is best for parts that have consistent surface reflectivity properties along the entire part because the camera chooses a single exposure for each stripe.

HEXAGON RS5 Scanner.png

  • RA7 7-axis Portable Arms with RS4 Scanners

ROMER Scanner Plus Hex Logo.png

  • CMS108 Scanners

ROMER CMSScanner.png

  • HP-L-20.8

  • RA7 and RA8 Portable Arms with HP-L-8.9 scanners

    This scanner is for attachment of a scanner on the same arms that use Tube Shaper software. See the ROMER HP-L-8.9 website

  • For use on 6 axis arms.

ROMER HPLScanner.png

  • Leica Absolute Scanner for Long Distances
  • The LR model can measure a 10 meter volume.
  • The MR model can measure a 20 meter volume.
  • YouTube video of LAS

LeicaLAS.png



ROMER Ball Probe Support

All ball probe systems on devices that run through RDS are compatible with VTube-LASER.




Other Pages