Difference between revisions of "Pulse Machine Lube Pump"

From ATTWiki
Jump to: navigation, search
(How to Choose to Pulse)
(How to Determine if the System Should Use Pulse Output)
 
(7 intermediate revisions by one user not shown)
Line 13: Line 13:
  
  
===How to Determine if the System Should Use Pulse===
+
===How to Determine if the System Should Use Pulse Output===
  
Only use pulse for lube systems that use a pneumatic valve to send lube oil throughout the machine. It is very important to set pulse OFF (0) if your machine uses an electric motor for its lube system.
+
Using a pulsed output is important for pneumatic valves.  Pulsing allows the pump to send lube throughout the system by operating the plunger several times during a lube event.
 +
<br><br>
 +
However, '''it is very important to set pulse OFF (0) if your machine uses an electric motor for its lube system.'''
 +
 
 +
<table cellpadding="15">
 +
<tr><td width=25></td>
 +
<td width=300 bgcolor="#f0f0f0">
 +
<font size=5>[[image:Gear_warning.jpg]] <b>WARNING!</b><br><br></font>
 +
<font size=3>'''Do not''' use PULSE setting for lube systems with '''electric motors'''.<br><br>
 +
Switching the electric-motor pump on and off with pulsing may damage the motor.
 +
</font></td></tr></table>
 +
 
 +
<br><br>
  
 
==Other Pages==
 
==Other Pages==

Latest revision as of 21:28, 28 January 2009

Cncbender logo.jpg


Pulse Machine Lube Pump

What is It?

This is a boolean (on/off) property in the CNCProcessor.cfg file. It is a switch that instructs CNC Processor to pulse the lube actuator during a machine lube event.

Value

The value is set to either 0 (for off) or 1 (for on).

Pulse Machine Lube Pump= 1


How to Determine if the System Should Use Pulse Output

Using a pulsed output is important for pneumatic valves. Pulsing allows the pump to send lube throughout the system by operating the plunger several times during a lube event.

However, it is very important to set pulse OFF (0) if your machine uses an electric motor for its lube system.

Gear warning.jpg WARNING!

Do not use PULSE setting for lube systems with electric motors.

Switching the electric-motor pump on and off with pulsing may damage the motor.



Other Pages