Principles of CNC Bender Data Transfer

From ATTWiki
Revision as of 16:02, 18 June 2010 by Mcone (Talk | contribs)

Jump to: navigation, search

Cncbender logo.jpg

This describes basic principles for bender data transfer to CNC Bender.

Create Supravision Data to Transfer the Master Data

CNC Bender can import Supravision data files that contain the XYZ master data for setup of a new part.

STEP 1

Create the SV data file using a software package like Supravision, TubeCalc, TubeCAD, VTube-STEP or one of the Benderlink packages. If you use measuring center software like Supravision or DOCS.

Vtube-step maincreen.jpg

STEP 2

Save the file to the c:\cnc\svparts folder in CNC Bender operator station (use a thumb drive or make a direct network connection)

STEP 3

In CNC Bender, go to the Tube Shape menu/XYZ tab

Cncbender xyzpage 180pipe.jpg

STEP 4

Press the SVin button button to select the Supravision file. Import the data into the XYZ page.

CNCBenderCalcSVin.jpg

STEP 5

Press the Calc FRB button to build the bender data

CNCBenderCalcFRB.jpg

STEP 6

CNC Bender automatically switches to the FRB menu to display the calculated data

CNCBenderFRBpage.jpg



Enter the Data in CNC Bender Offline Then Save as a Part

CNC Bender OFFLINE can be purchased to enter part data at a remote station, then save parts that are compatible with CNC Bender software.

STEP 1

Enter data in the Tube Shape menu (Pre-Bend, FRB, Post-Bend).

CNCBenderFRBpage.jpg

STEP 2

Press the SAVE button.

CNCBenderFRBSaveButton.jpg

STEP 3

Enter the Part name to use in the Save Part File menu and press Save.

If you want to save the part to one of the operator stations directly, then use Select New Temporary Path to find the \cnc\parts folder on that operator station on the network, then save the part.

You can also use a USB thumb drive to transfer the part to an operator station.

CNCBenderSavePartFile.jpg

STEP 4

Enter the File menu by pressing the File button in the main menu.

CNCBenderMainMenu.jpg

STEP 5

Press the Load Part button

CNCBenderLoadPartButton.jpg

STEP 6

Select the new part just copied and press the Load the File button.

CNCBenderLoadPartFileMenu.jpg

STEP 7

Finalize the setup of the bender.

CNCBenderFRBpage.jpg