Difference between revisions of "Measure Large Diameter Tubing"

From ATTWiki
Jump to: navigation, search
(Wide-Scan Technique for Large Diameters)
(Instruction for Large Diameter Measures)
Line 23: Line 23:
 
VTube is immune to diameter sizes if you follow the wide-scan technique to measure larger diameters.  If a diameter surface stripe does not cover enough angular distance, then the math engine loses accuracy in calculating the centerline of a straight.<br><br>
 
VTube is immune to diameter sizes if you follow the wide-scan technique to measure larger diameters.  If a diameter surface stripe does not cover enough angular distance, then the math engine loses accuracy in calculating the centerline of a straight.<br><br>
 
For diameters 6" and greater, you can switch to the wide-scan technique.  On larger diameters, it is important to scan in points from a wider area of the tube.<br><br>
 
For diameters 6" and greater, you can switch to the wide-scan technique.  On larger diameters, it is important to scan in points from a wider area of the tube.<br><br>
* First scan one end in the normal way.<br><br>
+
* First - scan one end in the normal way.<br><br>
 
* Second - move to the other end, and rotate the probe around the tube slightly.  We recommend about 90 degrees of rotation.  Then scan the new end and new side of the cylinder.<br><br>
 
* Second - move to the other end, and rotate the probe around the tube slightly.  We recommend about 90 degrees of rotation.  Then scan the new end and new side of the cylinder.<br><br>
  

Revision as of 22:17, 11 July 2012

Vtube-laser logo.jpg How to measure large diameter tube and pipe in VTube-LASER

Vtube-laser 1 73.jpg


Instruction for Large Diameter Measures

Vtube widescan illustration largetube.jpg

VTube is immune to diameter sizes if you follow the wide-scan technique to measure larger diameters. If a diameter surface stripe does not cover enough angular distance, then the math engine loses accuracy in calculating the centerline of a straight.

For diameters 6" and greater, you can switch to the wide-scan technique. On larger diameters, it is important to scan in points from a wider area of the tube.

  • First - scan one end in the normal way.

  • Second - move to the other end, and rotate the probe around the tube slightly. We recommend about 90 degrees of rotation. Then scan the new end and new side of the cylinder.


Other Pages