Machine Lube Duration

From ATTWiki
Revision as of 21:13, 28 January 2009 by Mcone (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Cncbender logo.jpg


What is It?

This is a property in the CNCProcessor.cfg file. It is a millisecond duration value that instructs CNC Processor to enable the machine lube event when the bend count reaches a preset value for a programmed number of milliseconds.

Value

A valid value is set from 1 to any integer value greater than 1 like this:

Machine Lube Duration= 5000

The value of 5000 in this example represents 5000 milliseconds (5 seconds) of the machine lube output enabled during auto lube.


Other Pages