How to Calculate Tube Elongation Percentage in VTube-LASER

From ATTWiki
Revision as of 14:58, 1 June 2016 by Mcone (Talk | contribs)

Jump to: navigation, search

Vtube-laser logo 1.96.png

Vtl screen hd scanner without logo.png


VTube-LASER can calculate Tube Elongation Percentage by subtracting the current CUT LENGTH from the MEASURED LENGTH - then calculate the percentage by comparing that change to the total ARC LENGTHS in the measured tube.

The formula used is (Measured Length - Cut Length) / (Arc Length Sum for Whole Tube) X 100

Vtube-laser v2.5 recalc TubeElongation.png



How to Calculate Tube Elongation Percentage in VTube-LASER

Any time VTube-LASER has these three conditions it can calculate tube elongation percentage:

  1. The presence of MASTER XYZ centerline data
  2. The presence of MEASURED XYZ centerline data
  3. The presence of an actual Cut Length value in Part setup of the part before bending

If these three conditions are true then you can right click on the Part Setup menu, and use the recalculate tube elongation percentage value.



Other Pages

Retrieved from "http://www.advancedtubular.wiki/index.php?title=How_to_Calculate_Tube_Elongation_Percentage_in_VTube-LASER&oldid=30169"