How to Calculate Tube Elongation Percentage in VTube-LASER
From ATTWiki
|
How to Calculate the Tube Elongation Percentage in VTube-LASER
VTube-LASER can calculate Tube Elongation Percentage by subtracting the current CUT LENGTH from the MEASURED LENGTH - then calculate the percentage by comparing that change to the total ARC LENGTHS in the measured tube.
If these three conditions are true then you can right click on the Part Setup menu, and use the calculate tube elongation percentage value. |
Other Pages
- Back to VTube-LASER
- See also Calibration-Leapfrog-Move Targets
- Purchase the targets at the store.