Difference between revisions of "How to Calculate Tube Elongation Percentage in VTube-LASER"
From ATTWiki
(→How to Calculate Tube Elongation Percentage in VTube-LASER) |
(→How to Calculate Tube Elongation Percentage in VTube-LASER) |
||
Line 36: | Line 36: | ||
# The presence of an actual Cut Length value in Part setup of the part before bending | # The presence of an actual Cut Length value in Part setup of the part before bending | ||
− | If these three conditions are true then you can right click on the Part Setup menu, and use the recalculate tube elongation percentage value. | + | If these three conditions are true then you can right click on the Part Setup menu, and use the '''recalculate tube elongation percentage''' value. |
</td> | </td> | ||
<td width=300> | <td width=300> |
Revision as of 14:57, 1 June 2016
|
About Tube Elongation Percentage in VTube-LASER
VTube-LASER can calculate Tube Elongation Percentage by subtracting the current CUT LENGTH from the MEASURED LENGTH - then calculate the percentage by comparing that change to the total ARC LENGTHS in the measured tube. |
How to Calculate Tube Elongation Percentage in VTube-LASER
Any time VTube-LASER has these three conditions it can calculate tube elongation percentage:
If these three conditions are true then you can right click on the Part Setup menu, and use the recalculate tube elongation percentage value. |
Other Pages
- Back to VTube-LASER
- See also Calibration-Leapfrog-Move Targets
- Purchase the targets at the store.