Difference between revisions of "Helical coil"

From ATTWiki
Jump to: navigation, search
(Coil Radius)
(Coil Pitch)
 
(11 intermediate revisions by one user not shown)
Line 1: Line 1:
 +
[[image:Cncbender_logo_pushbending.png]]
 +
 
A helical coil has a centerline shape of a helix.  A helix (pl: helixes or helices) is a curve that forms a spiral or a coil in space.
 
A helical coil has a centerline shape of a helix.  A helix (pl: helixes or helices) is a curve that forms a spiral or a coil in space.
 
<br><br>
 
<br><br>
 +
[[image:coilpitch.jpg|400px|right]]
 
CNC Bender uses [[push bending]] with a rotational twist in the Rotation axis to create helical tube or pipe coils used in often heat transfer and immersion applications.
 
CNC Bender uses [[push bending]] with a rotational twist in the Rotation axis to create helical tube or pipe coils used in often heat transfer and immersion applications.
 
==Coil Pitch==
 
==Coil Pitch==
[[image:coilpitch.jpg|200px|right]]
+
 
The pitch of a helix is the width of one complete helix turn, measured along the helix axis.
+
The '''pitch''' of a helix is the width of one complete helix turn, measured along the helix axis. see the "P" dimension in the image on the right.
 
<br><br>
 
<br><br>
With CNC Bender the '''pitch''' is most affected by the Twist Ratio in the [[Push Bend Profile Table]].  The twist ratio is the gear ration of twist degrees of the Rotation axis to the linear motion of the Feed axis in a CNC bender performing push bending.
+
With CNC Bender the '''pitch''' of a tube coil is most affected by the [[coil twist ratio]] in the [[Push Bend Profile Table]].   
 
<br><br>
 
<br><br>
 
Increase the ratio value to increase the pitch in a coiled tube.
 
Increase the ratio value to increase the pitch in a coiled tube.
 +
 +
<table>
 +
<tr>
 +
<td width="250">
 +
This is a solid model of a copper tube with a 50 millimeter pitch.
 +
</td>
 +
<td>
 +
[[image:coil_50pitch.jpg|200px]]
 +
</td>
 +
</tr>
 +
 +
<tr>
 +
<td width="250">
 +
This is a solid model of the same copper tube with a 65 millimeter pitch.
 +
</td>
 +
<td>
 +
[[image:coil_65pitch.jpg|200px]]
 +
</td>
 +
</tr>
 +
 +
</table>
  
 
==Coil Radius==
 
==Coil Radius==
Line 15: Line 39:
 
Other factors include the distance between the two opposing rollers in the front die and material composition and wall thickness.  The largest contributor to the coil radius is the bend arm angle during push bending.
 
Other factors include the distance between the two opposing rollers in the front die and material composition and wall thickness.  The largest contributor to the coil radius is the bend arm angle during push bending.
 
<br><br>
 
<br><br>
 +
 +
==Coiled Tube Sample==
 +
This is a sample tube coil that was bent using both draw bending and [[push bend]]ing.<br><br>
 +
[[image:coiltube_sample.jpg|300px]]
  
 
==Other Pages==
 
==Other Pages==

Latest revision as of 04:44, 2 January 2009

Cncbender logo pushbending.png

A helical coil has a centerline shape of a helix. A helix (pl: helixes or helices) is a curve that forms a spiral or a coil in space.

Coilpitch.jpg

CNC Bender uses push bending with a rotational twist in the Rotation axis to create helical tube or pipe coils used in often heat transfer and immersion applications.

Contents

Coil Pitch

The pitch of a helix is the width of one complete helix turn, measured along the helix axis. see the "P" dimension in the image on the right.

With CNC Bender the pitch of a tube coil is most affected by the coil twist ratio in the Push Bend Profile Table.

Increase the ratio value to increase the pitch in a coiled tube.

This is a solid model of a copper tube with a 50 millimeter pitch.

Coil 50pitch.jpg

This is a solid model of the same copper tube with a 65 millimeter pitch.

Coil 65pitch.jpg

Coil Radius

The radius of a helical tube shape is controlled mainly by the bend arm angle during push bending.

Other factors include the distance between the two opposing rollers in the front die and material composition and wall thickness. The largest contributor to the coil radius is the bend arm angle during push bending.

Coiled Tube Sample

This is a sample tube coil that was bent using both draw bending and push bending.

Coiltube sample.jpg

Other Pages