XYZ Data

In addition to the XYZ points and bend RADII...

• NEW - Properly skip REFERENCE points in the XYZ data. (Reference points are not intersection or end points. They are not used to define the shape of the tube.)

• NEW - Retain XYZ data as it exists in the FIF file. No longer attempt a recalc from YBC to XYZ. This allows measuring centers to be sure to retain original XYZ MASTER data during conversion.

YBC (Bender) Data

In addition to the YBC data...

• NEW - Retain YBC data as it exists in the FIF file. No longer attempt a recalc from XYZ to YBC. This allows measuring centers to retain original YBC bender setup data during conversion.

SPEED Data

• NEW - Conversion of YBC axes speeds: 1 - 8

FUNCTION Data

• NEW - Conversion of all YBC FUNCTION Bits (12345678)

SPECIAL FUNCTION Data

• NEW - Conversion of all YBC FUNCTION STOP and LAST Bits

EATON LEONARD SETUP Data

NEW PROCESS VALUES CONVERTED:

• NEW - Default Radius (from first radius level)
• NEW - End A Diameter
• NEW - End B Diameter

EATON LEONARD TOOL Data

Handles Up to 9 Radius Levels - EACH LEVEL can contain:

• NEW - Radius
• NEW - Fixed Springback
• NEW - Proportional Springback
• NEW - Clamp Length
• NEW - Clearance Feed
• NEW - Clearance Angle

EATON LEONARD SETUP Data

• NEW - Ymin
• NEW - Interference Zone 1
• NEW - Interference Zone 2
• NEW - Load Position
• NEW - Load Offset
• NEW - Y Position Tolerance
• NEW - Pressure Die Open Code
• NEW - Boost Delay

EATON LEONARD EXTENDED SETUP Data

• NEW - Up to 99 EXTENDED setup values are automatically converted