FARO Version 6 Scanner
About Laser Stripes
FARO scanners emit what appears to be a laser line that strikes a surface. The line is actually divided into thousands of distinct dots that are then interpreted as surface points at the FARO scanner.
Blue Laser
The version 6 scanner is the first scanner to emit a blue laser. The previous versions emit red lasers.
The Advantages of the Blue Laser Scanner
The blue laser technology is no gimmick. It has important advantages over previous scanners.
The v6 scanner takes advantage of the reduced refraction properties of blue laser versus red laser. Every pixel or point of laser on a surface has an inherent amount of spectral refraction that makes the point less precise because the edges of the point become blurred to some laser systems. The v6 blue laser has a less refracted dot (sharper) than previous red laser version dots - making precise detection by the camera much easier than before.
Here are some strong advantages of improved spectral refraction performance:
- The dots in the stripes are more precise than was previously possible.
- The v6 scanner can return twice as many points in a laser stripe than the previous v5 scanner. It can now return 2000 points per stripe along the full length of the stripe.
- It has proved to be superior to previous scanners for measuring materials that are black or highly reflective.
- It can handle bright factory lighting where previous versions struggled to overcome the room lighting. It even overcomes sunlight coming in the bay doors of factories. None of the previous versions could handle nearby sunlight.
CAM2 Software: Benderlink for FARO
For benders or Benderlink software that use the SVNET protocol
Communications with benders can be performed through VTube-LASER or Benderlink for FARO (for CAM2).
Other Pages
- See VTube-LASER in the knowledgebase
- See the VTube-LASER web page.
- See the Benderlink for FARO web page.
- See the FARO web site.
- See FARO Version 6 Scanner
