Difference between revisions of "FARO CAM2"

From ATTWiki
Jump to: navigation, search
(Exporting from VTube to CAM2)
(Exporting from VTube to CAM2)
Line 16: Line 16:
 
== CAM2 Measure 10 and VTube-LASER Working Together ==
 
== CAM2 Measure 10 and VTube-LASER Working Together ==
  
=== Exporting from VTube to CAM2 ===
+
=== Exporting from VTube to CAM2 Files ===
 
<table>
 
<table>
 
<tr cellpadding=10>
 
<tr cellpadding=10>

Revision as of 17:52, 12 January 2013

FARO CAM2 software for measuring prismatic shapes. It is used by tube fabrication customers on FARO arms along with VTube-LASER to measure components around tube shapes.

Customers measure tube shapes quickly with VTube-LASER with the laser scanner, then output parametric tube data to CAM2.

Cam2measure10.jpg

This version of CAM2 software released in 2011 (See FARO news release).

Cam2measure10box.jpg


Contents

CAM2 Measure 10 and VTube-LASER Working Together

Exporting from VTube to CAM2 Files

Since year 2010, FARO has started selling VTube-LASER as their primary tube measuring software package. (FARO is the exclusive distributor for VTube-LASER in North and South America.)

VTube-LASER exports CAM2 Measure 10 parametric tube files for measuring brackets and components around the tube. Both the MASTER and the MEASURED tube shapes can be exported in the FILE tab sub-menus for each tube centerline.

These screen images show the VTube-LASER demo tube being transferred to CAM2 from VTube.

Importing to CAM2

Use the Import/Export option in the File pulldown menu to import the CAM2 file that VTube builds.

The tube shapes can be imported into CAM2 as NOMINAL (VTube MASTER), or ACTUAL (VTube MEASURED). When importing actual or measured, it is possible to quickly scan a tube with VTube, then continue with measuring components around the tube in CAM2. The method is to leave the tube in the same location when measuring in two programs. The correct position in space relative to the base of the arm is then transferred into CAM2 Measure 10.

Vtube-laser exportcam2.jpg
Vtube-laser exportcam2button.jpg
Cam2measure10withtube.jpg

CAM2Q (release about 2008)

This version of CAM2 software released in 2008 (See FARO news release).

This version has not been tested for communication with any of our software.

Cam2q.jpg

CAM2 Measure X - (released about 2005)

CAM2 Measure X1 was released in 2005 (See FARO news release).

It can output text files for communication with our Benderlink for FARO software.

Cam2measurex.jpg

Communications between CAM2 Measure X and benders is through the EXPORT - XYZ - TXT feature to Benderlink for FARO software.

Blinkfaro mainscreen v1.5.jpg