FARO

From ATTWiki
Revision as of 17:16, 21 March 2022 by Mcone (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Farologo.jpg
Faro edge scanning tube unison.png
Faroedge scanarm hdscanner.png
Faro edge hdscanner 001.png
Vtube-laser logo 1.96.png
Vtl screen hd scanner without logo.png
Faro scanner v6.png



FARO North and South America

FARO Americas is a distributor for our VTube-LASER software in North and South America.

FARO Technologies designs and sells articulated measuring center arms and measuring software that can measure tube shapes.

The company headquarters is in Lake Mary, Florida.

FARO North and South America - VTube-LASER Skill Set

  • VTube-LASER Demo: Yes
  • VTube-LASER Sell: Yes
  • VTube-LASER Train: No (Training handled by Advanced Tubular Technologies, Inc.)
  • VTube-LASER Tech Support: No (Support handled by Advanced Tubular Technologies, Inc.)

Contact

FARO Technologies Inc.
125 Technology Park - Lake Mary, FL 32746
(800) 736-0234 - (407) 333-9911




FARO UK

FARO UK is an authorized distributor for our VTube-LASER software in the United Kingdom.

The UK division is equipped to sell VTube-LASER, and has expert staff trained in the use of VTube-LASER. They are able to support and train customers in the UK.

FARO UK - VTube-LASER Skill Set

  • VTube-LASER Demo: Yes
  • VTube-LASER Sell: Yes
  • VTube-LASER Train: Yes
  • VTube-LASER Tech Support: Yes

Contact

FARO Technologies UK Ltd
9-10 The Cobalt Centre, Siskin Parkway East
Middlemarch Business Park
Coventry, CV3 4PE
England
Hotline: 00800-3276-7253, Direct Dial: 02476 217690




Technical Information


Technical Videos



Measuring Software: VTube-LASER

VTube-LASER Tube Measuring Software

VTube-LASER is our tube measuring center solution for tube fabrication shops. It is designed exclusively for measuring tubes - which allows us to fine tune the package for tube shops and keep the package easy to use.

In 2010, we granted exclusive distribution rights to FARO for VTube-LASER in North and South America.



CAM2 Software: Benderlink for FARO

For benders or Benderlink software that use the SVNET protocol

Communications with benders can be performed through VTube-LASER or Benderlink for FARO (for CAM2).



Other Pages