End-Scan Using the End Wall

How to perform the end-wall end scan. Back to VTube-LASER

Why the End-Scan technique is important

This end-scan method is useful for increase in precision over the scissor method. We recommend this for increased precision where high-reflectivity and burrs are not an issue on the end wall of the tube. We also recommend the End-Scan Using the End Wall technique and the most precise End-Scan Using End Targets.

How To Use This End-Scan Technique

Align the scanner with a slight scissor angle across the end as is shown in the image on the right Press the green button until VTube-LASER is finished scanning all the end stripes.

Other Pages

• Go to End-Scan Using the End Wall
  
  
• Go to End-Scan Using End Targets
  
  
• Back to VTube-LASER