Difference between revisions of "End-Scan Using the End Wall"

From ATTWiki
Jump to: navigation, search
(Another Way to Use This End-Scan Technique)
(Another Way to Use This End-Scan Technique)
Line 47: Line 47:
 
===Another Way to Use This End-Scan Technique===
 
===Another Way to Use This End-Scan Technique===
  
* The advantage of this method is that it is less prone to outlier points.<br><br>
 
* The disadvantage is that it is hard to aim at thinner walls.
 
  
 
<table cellpadding=10>
 
<table cellpadding=10>
Line 56: Line 54:
 
*Press the green button until VTube-LASER is finished scanning all the end stripes.<br><br>
 
*Press the green button until VTube-LASER is finished scanning all the end stripes.<br><br>
  
 +
The advantage of this method is that it is less prone to outlier points.  The disadvantage is that it is hard to aim at thinner walls.
  
 
</td>
 
</td>

Revision as of 23:00, 27 January 2012

Vtube-laser logo.jpg How to perform the end-wall end scan.

Vtube-laser 1 73.jpg


Why the End-Scan technique is important

This end-scan method is useful for increase in precision over the scissor method.

We recommend this for increased precision where high-reflectivity and burrs are not an issue on the end wall of the tube.

We also recommend the End-Scan Using the End Wall technique and the most precise End-Scan Using End Targets.

How To Use This End-Scan Technique

  • Align the scanner at the end wall of the tube.

  • Press the green button until VTube-LASER is finished scanning all the end stripes.

EndWithEndWall1.jpg


Another Way to Use This End-Scan Technique

  • Align the scanner so that it touches one end wall of the tube.

  • Press the green button until VTube-LASER is finished scanning all the end stripes.

The advantage of this method is that it is less prone to outlier points. The disadvantage is that it is hard to aim at thinner walls.

EndWithEndWall2.jpg

Other Pages