Configuring Machine Lube Settings

In the CNCProcessor.cfg File

The CNCProcessor.cfg contains the property values that allow you adjust the Machine Lube setup in CNC Bender. For more about the config file, see CNCProcessor.cfg.

Configuration Section: "Machine Lube"

The settings in this file are separated by sections with section names in square brackets. This is an example:

[Machine Lube]
Machine Lube Duration=5000
Lube Machine At Bend Count=100
Pulse Machine Lube Pump=1
Watch For Machine Lube Complete Input=0

The four values above control the machine lube features in CNC Bender.

Value 1: "Machine Lube Duration"

• Read how to set the Machine Lube Duration

Value 2: "Lube Machine At Bend Count"

• Read how to set the Lube Machine At Bend Count

Value 3: "Pulse Machine Lube Pump"

• Read how to set the Pulse Machine Lube Pump

Value 4: "Watch For Machine Lube Complete Input"

• Read how to set the Watch For Machine Lube Complete Input

Other Pages

• Back to CNC Bender Technical Notes
• See Auto Lube for details on how to test the Auto Lube system