Difference between revisions of "Configuring Machine Lube Settings"

From ATTWiki
Jump to: navigation, search
(Other Pages)
(Other Pages)
Line 32: Line 32:
  
 
==Other Pages==
 
==Other Pages==
Back to [[CNC Bender Technical Notes]]
+
*Back to [[CNC Bender Technical Notes]]
See [[Auto Lube]] for details on how to test the Auto Lube system
+
*See [[Auto Lube]] for details on how to test the Auto Lube system

Revision as of 21:08, 28 January 2009

Cncbender logo.jpg

Contents


In the CNCProcessor.cfg File

The CNCProcessor.cfg contains the property values that allow you adjust the Machine Lube setup in CNC Bender. For more about the config file, see CNCProcessor.cfg.


Configuration Section: "Machine Lube"

The settings in this file are separated by sections with section names in square brackets. This is an example:

[Machine Lube]
Machine Lube Duration=5000
Lube Machine At Bend Count=100
Pulse Machine Lube Pump=1
Watch For Machine Lube Complete Input=0

The four values above control the machine lube features in CNC Bender.

Value 1: "Machine Lube Duration"

Value 2: "Lube Machine At Bend Count"

Value 3: "Pulse Machine Lube Pump"

Value 4: "Watch For Machine Lube Complete Input"

Other Pages