Difference between revisions of "Configuring Machine Lube Settings"
From ATTWiki
(→"Machine Lube" Section) |
(→Other Pages) |
||
| Line 33: | Line 33: | ||
==Other Pages== | ==Other Pages== | ||
Back to [[CNC Bender Technical Notes]] | Back to [[CNC Bender Technical Notes]] | ||
| + | See [[Auto Lube]] for details on how to test the Auto Lube system | ||
Revision as of 21:08, 28 January 2009
Contents |
In the CNCProcessor.cfg File
The CNCProcessor.cfg contains the property values that allow you adjust the Machine Lube setup in CNC Bender. For more about the config file, see CNCProcessor.cfg.
Configuration Section: "Machine Lube"
The settings in this file are separated by sections with section names in square brackets. This is an example:
[Machine Lube] Machine Lube Duration=5000 Lube Machine At Bend Count=100 Pulse Machine Lube Pump=1 Watch For Machine Lube Complete Input=0
The four values above control the machine lube features in CNC Bender.
Value 1: "Machine Lube Duration"
- Read how to set the Machine Lube Duration
Value 2: "Lube Machine At Bend Count"
- Read how to set the Lube Machine At Bend Count
Value 3: "Pulse Machine Lube Pump"
- Read how to set the Pulse Machine Lube Pump
Value 4: "Watch For Machine Lube Complete Input"
- Read how to set the Watch For Machine Lube Complete Input
Other Pages
Back to CNC Bender Technical Notes See Auto Lube for details on how to test the Auto Lube system
