CRIPPA

From ATTWiki
Revision as of 00:18, 25 August 2012 by Mcone (Talk | contribs)

Jump to: navigation, search

Contents

CRIPPA Benders

CRIPPA benders are built in Italy and marketed worldwide. Customers report that they like these benders very much. They are often all electric with all actuators servo-controlled.

Crippa bender.jpg

CRIPPA UII Control software

The CRIPPA Windows software allows for complete programming of bender setup. It includes bender simulator. Crippa uii screen.jpg

VTube Support for CRIPPA Benders

As of version 1.77.4, VTube's Crippa export capability allows for easy export to Crippa UII software. The format is a text file that is compatible with most Crippa benders that were released in early 2012 and on.

Vtube step 1.77.4 crippa export.jpg
The bender data format is similar to the standard format, except that, for most Crippa benders, the rotations move in the opposite direction than most other benders. (Crippa standard: Clockwise is positive). VTube automatically builds the data, including reversed rotations into the SPF file.

The format includes the bender data and the cut length. Here is an example:

Crippa part shape.jpg
Vtube xyz for crippa.jpg

Creates this Crippa SPF data:

R101=60.33     R131=0.00      R161=90.00     
R102=50.80     R132=135.00    R162=90.00     
R103=50.80     R133=0.00      R163=90.00     
R104=50.80     R134=-135.00   R164=90.00     
R105=50.80     R135=-1.00     R165=90.00     
R106=50.80     R136=-90.00    R166=90.00     
R107=50.80     R137=-90.00    R167=90.00     
R108=111.13    R138=0.00      R168=0.00    
R6=606.82
M17

Contact Information

CRIPPA USA Distributor

Chris Harrison
Tube Process Technology LLC
4343 SKUSA DR
BRIGHTON, MI 48116

Phone (810) 599-1972
E-Mail: [email protected]

Other Pages