Difference between revisions of "CRIPPA"

From ATTWiki
Jump to: navigation, search
(CRIPPA UII Control software)
Line 47: Line 47:
 
</tr>  
 
</tr>  
 
</table>
 
</table>
 +
 +
==Other Pages==
 +
* See the [http://www.crippa.com/pagine/prodotti/curvatubi/curvatubi_presentazione_ing.asp Crippa Web Site]
 +
* See [[VTube-LASER]]
 +
* See [[VTube-STEP]]

Revision as of 23:44, 24 August 2012

Contents

CRIPPA Benders

CRIPPA benders are built in Italy and marketed worldwide. Customers report that they like these benders very much. They are often all electric with all actuators servo-controlled.

Crippa bender.jpg

CRIPPA UII Control software

The CRIPPA Windows software allows for complete programming of bender setup. It includes bender simulator. Crippa uii screen.jpg

VTube Support for CRIPPA Benders

The new Crippa export capability allows for easy export to Crippa UII software. The format is a text file that is compatible with most Crippa benders that were released in early 2012 and on.

Vtube step 1.77.4 crippa export.jpg
The bender data format is similar to the standard format, except that, for most Crippa benders, the rotations move in the opposite direction than most other benders. (Crippa standard: Clockwise is positive). VTube automatically builds the data, including reversed rotations into the SPF file.

The format includes the bender data and the cut length. Here is an example:

Crippa part shape.jpg
Creates this data:

R101=60.33     R131=0.00      R161=90.00     
R102=50.80     R132=135.00    R162=90.00     
R103=50.80     R133=0.00      R163=90.00     
R104=50.80     R134=-135.00   R164=90.00     
R105=50.80     R135=-1.00     R165=90.00     
R106=50.80     R136=-90.00    R166=90.00     
R107=50.80     R137=-90.00    R167=90.00     
R108=111.13    R138=0.00      R168=0.00    
R6=606.82
M17

Other Pages